1991civicsi build thread
#122
Re: 1991civicsi build thread
I checked the firing order 3x and the order is correct, thats the 1st thing I thought. Today while cranking it over, it went pop pop pop, like it was trying to start, but didnt.
I pulled the plugs and they were wet with fuel.
Im gonna do a compression test, and check spark on each plug. The battery needs to be charged, so Im doing that as I type this.
The IC pipes have to be mocked up and I got to get another clutch pedal.
I pulled the plugs and they were wet with fuel.
Im gonna do a compression test, and check spark on each plug. The battery needs to be charged, so Im doing that as I type this.
The IC pipes have to be mocked up and I got to get another clutch pedal.
#123
Re: 1991civicsi build thread
The first time I tried to start my car after installing the turbo setup, it wouldn't start. I'd been through some fuel management issues before that, so I figured that was the problem still, so i spent hours going through, checking each wire and resoldering everything, still didn't work. Then I charged the battery :1
#124
Re: 1991civicsi build thread
Originally Posted by EGgyLShatch
The first time I tried to start my car after installing the turbo setup, it wouldn't start. I'd been through some fuel management issues before that, so I figured that was the problem still, so i spent hours going through, checking each wire and resoldering everything, still didn't work. Then I charged the battery :1
#127
Re: 1991civicsi build thread
Originally Posted by c0mpl3x
dizzy timing? fuel reg?
Originally Posted by taiajam
arent you soaking you engine with fuel? you have 550 injectors, is you ecu tuned for 550 injectors?
maybe your crank is turned 180 degrees
maybe your crank is turned 180 degrees
#129
Re: 1991civicsi build thread
OK I checked all the connections and they look secure. The car starts after sitting overnite, but stalls after 3-4 sec.
The plugs were wet when I pulled them out.
The car is not throwing any codes, but when I use the jumper the CEL stays lit and dosent flash. (OBD0-OBD1 convrsn)
The plugs were wet when I pulled them out.
The car is not throwing any codes, but when I use the jumper the CEL stays lit and dosent flash. (OBD0-OBD1 convrsn)