jinxy

pull it out clean it right. or youll regret it.

tr4cti0n.i55ues

link it has already been said.
unbolt mounts
jack the car up
throw some blocks of wood betweent the mounts and where they bolt to the car
take off the pan and get it cleaned and a drain welded in

linkmustang

well i bought a step drill bit that pulls all the crap out i will dril that hole to a 3/4 to fir the fiting and i have a small pump that i will i will mak a pic so i still that to order so 3 inch pipe for the side from the intercooler to the tb

k here

jinxy

wont work, you need to take the pan off.

linkmustang

why would it not i would flush the pan out
.
just orderd 4 3inch u bends from lsd for 65 man

jinxy

because metal will stick to the side walls of the pan and ---- and come off later. It only takes a grain sized peice of metal to do some seirous damage to a bearing.

tr4cti0n.i55ues

link you are making this to complicated. you already have a jack all you need is a couple blocks of wood, a new oil pan gasket and some free time. if you cant get the pan off trying what has been suggested then try and fllush the pan

linkmustang

what about spraying wd40 in he hole to hit the shaving i will try it and see what i get

BoostedBSeries

why are u being lazy?? yeah it sucks to take it off.... but take it off man

Erich

When you take the pan off, you can weld the fittings on nicely as a bonus.
Erich