92 mustang twin turbos
#241
Re: 92 mustang twin turbos
hey linkster, give me 400 thats the next step :P
i got my downpipes all together, ive been crawlin under the car for the last couple days plugging all the little holes i can find. think i got it pretty much good enough
the car is so quiet i hear the p/s whining over the engine noise... it feels and sounds great driving... it really owned my spool time unfortunatly... and it also owned my boost cause now its boosting like 3-4 pounds instead of 5.5
im about to start a new job making twice as much as i did at hewlett packard so i should be able to afford to convert to a single sooner
good luck linkmister
i got my downpipes all together, ive been crawlin under the car for the last couple days plugging all the little holes i can find. think i got it pretty much good enough
the car is so quiet i hear the p/s whining over the engine noise... it feels and sounds great driving... it really owned my spool time unfortunatly... and it also owned my boost cause now its boosting like 3-4 pounds instead of 5.5
im about to start a new job making twice as much as i did at hewlett packard so i should be able to afford to convert to a single sooner
good luck linkmister
#245
Re: 92 mustang twin turbos
[size=14ptWell spent some big money today[/size]
well i spent like 420 at summitracing.com
Brand: Innovate Technology Inc.
Product Line: Innovate LM-1 Air/Fuel Ratio Monitors
Quantity: Sold as a kit.
$349.95
Estimated Ship Date: Tuesday
Data Acquisition, Digital Air/Fuel Ratio Meter, LM-1, Basic, Kit
Precise air/fuel readings for carbureted or EFI engines.
Finally, there's a tool that carburetor and fuel injection fans can share--Innovative Technology's LM-1 wideband air/fuel ratio monitors. The fully digital monitors take the guesswork out of tuning by delivering the exact air/fuel ratio instead of just reading rich or lean, and they're self-calibrating to give you accurate readings. The LM-1s measure data 12 times per second for up to 44 minutes. The data can be downloaded to a PC with the included serial cable and software so you can graph multiple sessions. Instead of spending hours tweaking and tuning your carburetor, use the LM-1s to get the information you need, tune your carb, and be done. Tuning a fuel injection system involves many variables, but the optional auxiliary-input cable provides up to 5 simultaneous readings, for a more complete view of an engine system's performance. For example, you can measure and graph specific air/fuel ratios in relation to rpm, MAF, MAP, TPI, and more. The LM-1 kits include a Bosch wide-band oxygen sensor and cable, cigarette lighter power adapter, serial cable for PC, 9 V battery, exhaust bung and plug, quick-start guide, and a CD with software and manual.
SUM-220136 $19.95
Estimated Ship Date: Tuesday
Suggested Parts Show All
Brand: Summit
Product Line: Summit Steel Hard Line
Tubing Material: Steel
Tubing Outside Diameter (in): 3/16 in.
Tubing Finish: Natural
Tubing Length (ft): 25 ft.
Quantity: Sold individually.
Tubing, Steel, Natural, 3/16 in. x 25 ft., Each
Quality line steel line for your brake or fuel system.
These OEM style steel line is double wrapped for strength, and is available terne coated to resist corrosion or blue, red, yellow, green colored line. They have been pressure-tested and checked for safety.
SUM-220137 $5.95
Estimated Ship Date: Tuesday
X2
Brand: Summit
Product Line: Summit Inverted Flare Tube Nut Fittings
Fitting Attachment 1: Male inverted flare
Fits Tubing Diameter: 3/16 in.
Fitting Material: Steel
Fitting Finish: Natural
Quantity: Sold as a set of 16.
Fittings, Inverted Flare, Steel, 3/16 in. Tube, Set of 16
Check to make sure this part fits your application
Inverted flare fittings for your brake system.
Summit inverted flare tube nut fittings are manufactured from your choice of steel or stainless steel for strength and durability. They are perfect for use with your brake system and custom plumbing.
ARP-100-1412 $26.88
Estimated Ship Date: Tuesday
Application Show All
Brand: ARP Automotive Racing Products
Product Line: ARP Chromemoly Header Stud Kits
Fastener Style: Stud
Universal: No
Thread Size: 3/8-16 in.
Head Style: External hex
Overall Length (in): 1.67
Fastener Material: Steel
Fastener Finish: Black oxide
Quantity: Sold as a set of 12.
Header Fasteners, Studs, External Hex, Custom 450, Black Oxide, Chevy, Small Block, Set of 12
Check to make sure this part fits your application
Keep your headers in place!
ARP manufactures a variety of header stud kits to facilitate the installation of your headers. Rated at 170,000 psi, they're much stronger than stock and will last under even the most severe conditions. Each kit includes the specific number of parts required for the desired application, plus premium-quality washers and either hex or 12-point nuts. Universal kits are also available.
well i spent like 420 at summitracing.com
well i spent like 420 at summitracing.com
Brand: Innovate Technology Inc.
Product Line: Innovate LM-1 Air/Fuel Ratio Monitors
Quantity: Sold as a kit.
$349.95
Estimated Ship Date: Tuesday
Data Acquisition, Digital Air/Fuel Ratio Meter, LM-1, Basic, Kit
Precise air/fuel readings for carbureted or EFI engines.
Finally, there's a tool that carburetor and fuel injection fans can share--Innovative Technology's LM-1 wideband air/fuel ratio monitors. The fully digital monitors take the guesswork out of tuning by delivering the exact air/fuel ratio instead of just reading rich or lean, and they're self-calibrating to give you accurate readings. The LM-1s measure data 12 times per second for up to 44 minutes. The data can be downloaded to a PC with the included serial cable and software so you can graph multiple sessions. Instead of spending hours tweaking and tuning your carburetor, use the LM-1s to get the information you need, tune your carb, and be done. Tuning a fuel injection system involves many variables, but the optional auxiliary-input cable provides up to 5 simultaneous readings, for a more complete view of an engine system's performance. For example, you can measure and graph specific air/fuel ratios in relation to rpm, MAF, MAP, TPI, and more. The LM-1 kits include a Bosch wide-band oxygen sensor and cable, cigarette lighter power adapter, serial cable for PC, 9 V battery, exhaust bung and plug, quick-start guide, and a CD with software and manual.
SUM-220136 $19.95
Estimated Ship Date: Tuesday
Suggested Parts Show All
Brand: Summit
Product Line: Summit Steel Hard Line
Tubing Material: Steel
Tubing Outside Diameter (in): 3/16 in.
Tubing Finish: Natural
Tubing Length (ft): 25 ft.
Quantity: Sold individually.
Tubing, Steel, Natural, 3/16 in. x 25 ft., Each
Quality line steel line for your brake or fuel system.
These OEM style steel line is double wrapped for strength, and is available terne coated to resist corrosion or blue, red, yellow, green colored line. They have been pressure-tested and checked for safety.
SUM-220137 $5.95
Estimated Ship Date: Tuesday
X2
Brand: Summit
Product Line: Summit Inverted Flare Tube Nut Fittings
Fitting Attachment 1: Male inverted flare
Fits Tubing Diameter: 3/16 in.
Fitting Material: Steel
Fitting Finish: Natural
Quantity: Sold as a set of 16.
Fittings, Inverted Flare, Steel, 3/16 in. Tube, Set of 16
Check to make sure this part fits your application
Inverted flare fittings for your brake system.
Summit inverted flare tube nut fittings are manufactured from your choice of steel or stainless steel for strength and durability. They are perfect for use with your brake system and custom plumbing.
ARP-100-1412 $26.88
Estimated Ship Date: Tuesday
Application Show All
Brand: ARP Automotive Racing Products
Product Line: ARP Chromemoly Header Stud Kits
Fastener Style: Stud
Universal: No
Thread Size: 3/8-16 in.
Head Style: External hex
Overall Length (in): 1.67
Fastener Material: Steel
Fastener Finish: Black oxide
Quantity: Sold as a set of 12.
Header Fasteners, Studs, External Hex, Custom 450, Black Oxide, Chevy, Small Block, Set of 12
Check to make sure this part fits your application
Keep your headers in place!
ARP manufactures a variety of header stud kits to facilitate the installation of your headers. Rated at 170,000 psi, they're much stronger than stock and will last under even the most severe conditions. Each kit includes the specific number of parts required for the desired application, plus premium-quality washers and either hex or 12-point nuts. Universal kits are also available.
well i spent like 420 at summitracing.com