-SKUM-

I cant wate to see this project done. It looks **** though. Keep up the good work.

Smith-02

then tim will run his teg, and stomp your bmw, parts permitting

Urinemachine

not worried

Something about M/T's on Weld wheels with nitrous off the line and launch control... I am not phased :P

seerex

Damn your about a 2 hour ride. I might just come down this summer .

Urinemachine

Designed this tonight:





Seventh fuel port is for direct feed to nitrous


Machining it on Saturday

Urinemachine

Welp.... we turned it from concept to object

Here it is in all its glory, a custom one-off -10AN BMW M50 fuel rail


















The little fitting in the middle is a 1/8NPT for fuel supply to nitrous solenoid Thinking ahead

klyph

How will it be secured in place?

Worm drive hose clamps and duct tape, no doubt

That drawing is solidworks, right? man, I wish I had that prog.

Urinemachine

we've got aluminum that we will clamp in the mill and run a tool right up with the same diameter as the round top porting, and then drill it and it'll be a hold-down.

Yep solidworks.


The cool thing bout this -10AN rail is that its a circle so when we couldn't fit it on the end mill we put it in the lathe. We clamped it with 3 shoes around the round part, and that centered it on its axis... and we tapped it/drilled the end on the lathe! The other extrusions you cannot do this on and I would have had to make some sort of fixture to mount the extrusion in as we could only clamp from the 1/2 spot down - that meant a lot of wobble. The lathe was perfect adn we got the O-ring seat and everything done.

stillnoturbo

How much pressure can the plastic intake manifold take? Just curious. Bad *** build so far.

klyph

More like the cool thing about having access to a machine shop...