jinxy

or could measure and cut metal :P is that from your harbor freight tig/are you just jabbing the filler rod in the arc?

Tom-Guy

BTW,

Fixed it for you.

ichbinsobose

ahahahahahaha

sohcpwr

and that flange has to be warpedb

Ichi-Go

Optical illusion. I am sure he is going to glob jb weld on it before he bolts it on to make sure it seals.

Smith-02

its nothing more warped than the stock manifold, the flange is cut with a saddle if you look at it from the side so when you look at it at an angle, it looks to be curved.

red oxide primer on the manifold, and the splatter is from not having access to a wire wheel at the time, and there's no real point in redoing it.

if i joined runner #2 between the first and 3/4 join, i would not be able to get a nut on the exh stud, already checked it.

Jcushing

post up a picture of the manifold laying on the flange face down on something flat, cause it looks pretty warped to me.

oh and how could you not have access to a wire wheel? you dont have a drill? you can get wire wheels for like a buck that go into any old drill chuck.

E-b0la

So which truck is the turbo going on? The 2wd or the 4wd?

Smith-02

the guy i was getting the 2wd off of, was having it towed it off his property when i drove by from getting money out of the bank.

it's going on the 4wd

Tom-Guy

HMT roots mean staying turbocharged for longer than 30 miles. This guy is a chump.