c0mpl3x is revamping the boosted yoda, new 22r, t3 60/63 style (pics p5)
08-15-2007, 12:40 AM
#191
1.0 BAR
Join Date: Sep 2006
Posts: 326
Re: c0mpl3x is revamping the boosted yoda, t3 60/63 style (pics p4)
Looks improved over the last one.
Get some gas with that MIG - your welds will be so improved you'll never look back.
Draw thru on 600cfm... I can't wait!
I did a blown 22r - draw thru using a TBI from a 4.3L - worked pretty well.
Get some gas with that MIG - your welds will be so improved you'll never look back.
Draw thru on 600cfm... I can't wait!
I did a blown 22r - draw thru using a TBI from a 4.3L - worked pretty well.
08-15-2007, 05:46 AM
#192
1.5 BAR
Join Date: Mar 2005
Posts: 723
Re: c0mpl3x is revamping the boosted yoda, t3 60/63 style (pics p4)
Its taking you longer than ---- to get this working. 
If you took an hour to plan and then do some cutting/welding, you'd have something worth a damn that would get better gas milage. And if you didn't know, going WOT to 0psi and then modulating the throttle to keep it around that means it runs almost exactly like NA using the same amount of fuel as WOT when NA.
If you took an hour to plan and then do some cutting/welding, you'd have something worth a damn that would get better gas milage. And if you didn't know, going WOT to 0psi and then modulating the throttle to keep it around that means it runs almost exactly like NA using the same amount of fuel as WOT when NA.
08-15-2007, 11:01 AM
#194
0.0 BAR
Thread Starter
Join Date: Apr 2006
Posts: 0
Re: c0mpl3x is revamping the boosted yoda, t3 60/63 style (pics p4)
i can't do anything with the 22rte block, unless i get 3.662 pistons, to fit the 3.662 bore, since 3.622 won't quite fit into 3.662 with no problems.
08-15-2007, 11:40 PM
#195
1.0 BAR
Join Date: Sep 2006
Posts: 326
Re: c0mpl3x is revamping the boosted yoda, t3 60/63 style (pics p4)
A 600cfm carb?
Stock is under 200cfm.
I ran a draw through setup with an SC on a 22R.. Worked great.. It was around 250-280cfm though.
If you get that manifold and turbo to work, you can set it up with a cheap TBI style 2bbl and MS.. No igintion control.. It's cake and will run a lot better.
Hey, at least you're answering the age old question "can I turbo a carb'd 22r"....
Stock is under 200cfm.
I ran a draw through setup with an SC on a 22R.. Worked great.. It was around 250-280cfm though.
If you get that manifold and turbo to work, you can set it up with a cheap TBI style 2bbl and MS.. No igintion control.. It's cake and will run a lot better.
Hey, at least you're answering the age old question "can I turbo a carb'd 22r"....
08-17-2007, 09:02 PM
#197
0.0 BAR
Thread Starter
Join Date: Apr 2006
Posts: 0
Re: c0mpl3x is revamping the boosted yoda, t3 60/63 style (pics p4)
angle shot
another angle shot
IC piping and 1g hit on hood. time for washers!!
All that's left for me to do right now, is connect the lines for oil feed, run the return into the pan that already has the fitting, plumb new gas lines, and hook up the vac/boost lines.
oh, and reconnect batt, put waterpump back on, add coolant, and, um... do an oil change
08-17-2007, 09:36 PM
#199
0.0 BAR
Thread Starter
Join Date: Apr 2006
Posts: 0
Re: c0mpl3x is revamping the boosted yoda, t3 60/63 style (pics p4)
Originally Posted by SinisterCRX
You still have that intercooler dont you? Why dont you use it? 
the inlets with couplers on them touch my headlights. i'll be doing too much bodywork to retain stock headlights, so im just not gonna use it.
08-17-2007, 10:17 PM
#200
Guest
Posts: n/a
Re: c0mpl3x is revamping the boosted yoda, t3 60/63 style (pics p4)
Originally Posted by c0mpl3x
the inlets with couplers on them touch my headlights. i'll be doing too much bodywork to retain stock headlights, so im just not gonna use it.
