95 TSI AWD Project VGT Holset no 56k
#181
Re: 95 TSI AWD Project VGT Holset no 56k
Originally Posted by SiFlyBy
First, chains cost money and I can still get around just fine. Second, I'm shooting for 300whp. If the engine blows...well, ---- it. I have a spare with a spun bearing. Between the 2 of them I have enough good parts to made 1 good engine for a few hundred bucks.
#182
Re: 95 TSI AWD Project VGT Holset no 56k
can someone get me measurements of the outside of one of these things? ive been looking at running some sort of vgt for years now but have never figured out a suitable controler for the electronicso now im looking into some mechanical solutions like aero has. i just want to know if i can fit the thing in my car before i spend the money on one. if someone could get the length and width at a few points id appriciate it
#183
Re: 95 TSI AWD Project VGT Holset no 56k
Originally Posted by fe3tcourier
Just winding you up man! ;-)
Originally Posted by Hellbert
can someone get me measurements of the outside of one of these things? ive been looking at running some sort of vgt for years now but have never figured out a suitable controler for the electronicso now im looking into some mechanical solutions like aero has. i just want to know if i can fit the thing in my car before i spend the money on one. if someone could get the length and width at a few points id appriciate it
#184
Re: 95 TSI AWD Project VGT Holset no 56k
Originally Posted by SiFlyBy
Just dishing it back
LARGE... When fitting mine in my engine bay, i measured across the compressor housing(which CANNOT be clocked), straight across the centerline to the comp outlet, it was about 13 inches. The turbine housing is about 11 or so and can only be clocked in increments because of the unison ring position inside the housing. I can get some measurements with pics on monday if you want them..
LARGE... When fitting mine in my engine bay, i measured across the compressor housing(which CANNOT be clocked), straight across the centerline to the comp outlet, it was about 13 inches. The turbine housing is about 11 or so and can only be clocked in increments because of the unison ring position inside the housing. I can get some measurements with pics on monday if you want them..
#185
Re: 95 TSI AWD Project VGT Holset no 56k
This would be pretty cool if it would work with the Holset speed sensor.
http://www.turbobygarrett.com/turbob...ed_sensor.html
http://www.turbobygarrett.com/turbob...ed_sensor.html
#186
Re: 95 TSI AWD Project VGT Holset no 56k
Originally Posted by aero
Do you think you could post pictures of the turbo? And do you have any way of measuring the compressor and turbine wheels accurately?
exducer=66.45mm
.9 a/r, stepped 3inch vband inlet and i think 4inch vband outlet
COMPRESSOR: inducer=58.00mm
exducer=81.55mm
.58 a/r. part of the a/r is built into the chra so it is not clockable
next to my current setup
vanes closed
vanes open
#190
Re: 95 TSI AWD Project VGT Holset no 56k
thats a POS damn pain in the *** 6.0 turbo. me and them are incredibly good friends ive spent many hours under the hoods of those trucks. id like to get some measurements of the holset. im not a big fan of the vband inlet on the garrett to leave that extremely heavy bastard hanging from it.
id like to have the measurements on a holset its going on an H22 hatch so theres not much room to work with. i can already see its almost certain that ill have to build a topmount for it but past that i cant tell without a few measurements.
id like to have the measurements on a holset its going on an H22 hatch so theres not much room to work with. i can already see its almost certain that ill have to build a topmount for it but past that i cant tell without a few measurements.