mahcivic

ight so i finally got my motor in, i picked up the oil prime thing from the machine shop, hook it up and start to pump 3 quarts of oil into the motor. let it run for the minute like its suppose to, shut it off and check the oil level. nothing. confused, then look on the ground and all that oil is on the ground. look under the dizzy and oil is ozzying out from between the block and head. WTF. must have put the headgasket on wrong...is that possible. guess i got to pull the head and see wat i did wrong

SpankedYA!

Is that even possible? Update when you find out what it was Jordan.

mahcivic

dude im embaressed to tell what i did, so i wont, but lets say i figured it out upon removal of the head.(and yes the headgasket was there)....just on wrong i feel like a fooogit. o well have a new one on the way and that ---- will be riping tomorrow night cant wait!

88dx

on first start up you always check for oil leaks, pretty much just check everthing over. how much oil was on the ground?

mahcivic

all of it, i figured out hte problem as stated above