HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   The Acclipse Turbo Project (DSM ACCORDS!!) (https://www.homemadeturbo.com/forced-induction-7/acclipse-turbo-project-dsm-accords-22033/)

Accord R33 06-26-2004 08:40 AM

Re:The Acclipse (DSM ACCORDS!!)...Trans/Oil Coolers for Turbo Setup
 
haha awesome. nice car too.

AznBadAss92LX 06-26-2004 02:59 PM

Re:The Acclipse (DSM ACCORDS!!)...Trans/Oil Coolers for Turbo Setup
 
jd very nice car, what kind of ic are you runnin and your auto also?

cool, be sure to take alots of pics eric

Accord R33 06-26-2004 09:23 PM

Re:The Acclipse (DSM ACCORDS!!)...Trans/Oil Coolers for Turbo Setup
 
well i finished the setup tonight. all went nice and smooth. however i dont have my chip burner or wideband in yet so im using an SMC for the next week or so.

im having a big problem though...when i start it up cold it runs fine for a few minutes and all of a sudden it will stall..keep in mind i dont have a downpipe yet. i THINK it might have to do with the o2 sensor being plugged in but having no exhaust to read. im having my exhaust welded monday so hopefully it will fix it.

if anyone has any suggestions as to anything else that could be going wrong (causing it to stall) please let me know i need all the suggestions i can get. thanks

-Eric

AznBadAss92LX 06-26-2004 09:39 PM

Re:The Acclipse (DSM ACCORDS!!)...Trans/Oil Coolers for Turbo Setup
 
just wait til you get everything on foO...get the downpipe on with the o2 sensor in and reading properly, and wideband o2 tune then if the problem persists, then you have a real problem...but until then just sit tight..maybe its the SMC..from your old setup i take it?

be sure to post your pics and maps when its all said and done

quadnie 06-26-2004 11:17 PM

Re:The Acclipse (DSM ACCORDS!!)...Trans/Oil Coolers for Turbo Setup
 
Was is running rich?

What is midnite setup? If he gets a successful map, I'm sure you will find many people copying it (like me).

JD 06-27-2004 02:27 AM

Re:The Acclipse (DSM ACCORDS!!)...Trans/Oil Coolers for Turbo Setup
 
Your running 450's right? What are your settings on the smc? The settings actually need to be a little low. With the afc I was running close to -20% in the higher rpms. BTW that turbo sounds like a missle without the downpie huh :D I loved that sound before the downpipe got put on.

JD 06-27-2004 02:29 AM

Re:The Acclipse (DSM ACCORDS!!)...Trans/Oil Coolers for Turbo Setup
 
BTW in the sig I dont have the intercooler on. I took the kit off when my car went to the shop (paint) and have yet to put it back on for lack of time. The kit I made uses a saab intercooler and fits in just like the DSM sidemount.

quadnie 06-27-2004 03:33 AM

Re:The Acclipse (DSM ACCORDS!!)...Trans/Oil Coolers for Turbo Setup
 
So you run your intercooler side mounted or front mounted? I talked with Adam about the ----, he's going to attempt side mount.

JD 06-27-2004 03:58 AM

Re:The Acclipse (DSM ACCORDS!!)...Trans/Oil Coolers for Turbo Setup
 
I run mine side mount. The intake holes on the accord run the same as the eclipse (when you remove the intake box and plumbing). Very easy to do.

quadnie 06-27-2004 04:41 AM

Re:The Acclipse (DSM ACCORDS!!)...Trans/Oil Coolers for Turbo Setup
 
Cool. Please post up some pics when u have a chance :)


All times are GMT -5. The time now is 09:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands