my RWD CRX project
04-29-2008, 04:52 PM
#141
0.0 BAR
Thread Starter
Join Date: Oct 2003
Posts: 0
Re: my RWD CRX project
^^^ nice work, but the engine is probably touching the road according to that pic.
04-29-2008, 05:59 PM
#142
3.0 BAR
Join Date: May 2006
Posts: 1,967
Re: my RWD CRX project
I can't believe how nice the shifter lined up with the OE floorboard.
04-29-2008, 06:37 PM
#143
0.0 BAR
Join Date: Jan 2006
Posts: 0
Re: my RWD CRX project
Originally Posted by weiRtech
^^^ nice work, but the engine is probably touching the road according to that pic.
well its a drag car aint it? lol
i went by this picture
05-03-2008, 10:32 PM
#144
1.0 BAR
Join Date: Dec 2002
Posts: 463
Re: my RWD CRX project
good ---- weir.....
05-03-2008, 10:50 PM
#145
1.5 BAR
Join Date: Oct 2005
Posts: 1,162
Re: my RWD CRX project
weir > NOG LOG
05-04-2008, 05:10 AM
#146
0.0 BAR
Join Date: Nov 2006
Posts: 0
Re: my RWD CRX project
This had better turn into turbo RWD CRX project.
05-06-2008, 05:50 PM
#147
0.0 BAR
Thread Starter
Join Date: Oct 2003
Posts: 0
Re: my RWD CRX project
well, i started filling some holes in the engine bay to smooth it out, but that got boring quick, so i figured i'd try and see how the engine is going to fit. to my surprise, it fit really well. the hood clearance issue isn't really high on the concern list, but the steering rack is definitely going to be a challenge. time to start fabbing up some mounts.
lots of room up front:
plent of room for a turbo:
firewall clearance:
master cylinder clearance:
there is about 1/2" to 3/4" hood clearance at the front of the valve cover:
the shifter location is exactly where the stock shifter is, just quite a bit higher:
ground clearance looks pretty acceptable, the tranny is actually about even with the lower rails on the unibody:
lots of room up front:
plent of room for a turbo:
firewall clearance:
master cylinder clearance:
there is about 1/2" to 3/4" hood clearance at the front of the valve cover:
the shifter location is exactly where the stock shifter is, just quite a bit higher:
ground clearance looks pretty acceptable, the tranny is actually about even with the lower rails on the unibody:
05-06-2008, 06:37 PM
#148
3.0 BAR
Join Date: Oct 2005
Location: St. Augustine FL
Posts: 3,936
Re: my RWD CRX project
that makes the pee pee hard
05-06-2008, 08:28 PM
#149
0.0 BAR
Join Date: Sep 2007
Posts: 0
Re: my RWD CRX project
I think I just wet myself.
05-06-2008, 08:52 PM
#150
0.0 BAR
Join Date: Nov 2006
Posts: 0
Re: my RWD CRX project
Originally Posted by weiRtech
plenty of room for a turbo:
