Re: TurboEDIT Support (OBD0) - Current Verison: 2.5.2
 

my searching skills suck ::)

Re: TurboEDIT Support (OBD0) - Current Verison: 2.5.2
 

i've been looking on PGMFI for 2 days and i see where it became WB capable but i cant find how to hook the WB up to datalog with EcuControl

Re: TurboEDIT Support (OBD0) - Current Verison: 2.5.2
 

Connect your wideband 0-5v output to your O2 sensor input wire.

Disable O2 sensor in the ROM Properties... wa-la.

Re: TurboEDIT Support (OBD0) - Current Verison: 2.5.2
 

i figured it was that simple, but i couldnt find it anywhere and didnt want to fry anything. electronics scare me.


now i just need a laptop. i had a PC at work in the middle of teh shop with a 6ft serial cable playing around to nite. the map trace thing is great, i just need to be able to drive my car while it doing its thing

Re: TurboEDIT Support (OBD0) - Current Verison: 2.5.2
 

ok im getting a chip set and going to chip my pm4 ecu and was woundering if i can just tell someone my specs and they burn me a chip or is it easy to learn to tune? or is there like a turboedit for dummies thing

Re: TurboEDIT Support (OBD0) - Current Verison: 2.5.2
 

Is O2 sensor with a turbo better not better. If you already have this shun me but Couldn't you make some code that would have the O2 sensor read 12:1 AF on boost and 14:1 on vacuum. Think that would improve performance and gas milage for those who care.

Re: TurboEDIT Support (OBD0) - Current Verison: 2.5.2
 

turboedit.org down for a while or just for now?

I need the latest version of TE

I got a partial tune with a 3bar from JKmotorsports but we couldnt finish, so Im gonna get the bin from him and try and figure this tuning out for myself

never used it before, we got the boost map pretty much dead perfect but I have to tune idle and partial throttle

Can snyone give me some pointers, I remember it being very lean @ 2500rpm an -10 vacuum

Thanks guys

Re: TurboEDIT Support (OBD0) - Current Verison: 2.5.2
 

I have been getting a lot of TE questions lately...seems to be some sort of revival. I dont think TurboEdit.org has been touched in ages.

Try this ZIP file. It includes an old installer version and the EXE of the newest version of TurboEdit along with 2 files people seem to be missing even after the install. They should go in your System32 folder of the computer...

http://www.-------------/downloads/TurboEdit-2.6.zip

Re: TurboEDIT Support (OBD0) - Current Verison: 2.5.2
 

But does it have 3bar support? I think your code is NG55 Kevin and you need Ng60. I use NG55 because it's the only 3bar BIN you can find on PGMFI.org

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

I went back to a 3bar unit

Chris I dunno if the sensor you sent me is a 2.5bar or not but its ------- TINY, like 1cm X 1cm and the vac niple is so small it aint funny

But I couldnt get it to work either so I went back to a 3 bar that I know Josh tuned WOT for me but the idle sucks

Josh, I need your help on that one

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

If you have the tiny unit...its the 2.5 Bar

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

Those SOP-8 2.5 bar are much easier to fit inside the stock MAP enclosure than the normal package ones. :6

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

Anymore new releases or any teaching anyone wanna do with TE?

Im gonna pick up a cheap laptop and try and get my car perfect this year

Last year I had some leaning out issues at high rpms, wonderring if anyones got anything I can work with

Or any info to share

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

im with WOT. is there a new version out yet and where can i get it from? i guess turboedit.org doesnt work anymore, and i need it badly!!!!!!! thanks if you can help.

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

Hasnt been developed and wont be by the original creator...some guys are trying stuff out over on PGMFI

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

ya turboef9 is missing in action

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

I thought Mike Robichaud was the original, and Parker rolled with his work? Not that he didn't legitimately take it a thousand leagues beyond what it was when the torch was passed to him. :)

Ignore the OMG HAX!!!1 front page as the rest of the site is still intact, and take a stroll down memory lane, guys:

http://ghettodyne.com/

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

I'm not 100% but I dont think William rolled with anyone elses work...he was a loner unfortunately and was quite particular.

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

Ghettodyne was more or less just datatable hacks of a stock ROM.

Mike and Jason/William talked via AIM for about a year before TE manifested, and for a while after until all the Z32 stuff subsumed Mike. It was more a communal effort in those days, I wasn't trying to take a jab at anyone. :)

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

William told me he wrote turbo edit so that he could tune his own ---- and felt like sharing, then he got fed up with getting hundreds of emails from people asking stupid questions and quit posting updates for it, now he just had a kid and just doesn't have time for anything now, thats why its now opensource.

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

once i purchase a chipped pm6 with base map can the car be driven and what are the limitations on driving the car until it can be tuned.

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

Try to stay out of boost and try to get it tuned asap. You could probably just have xenocron burn you a base map and it will be somewhat close to what you are running. Just give him all the details of your build.

Re: TurboEDIT Support (OBD0) - Current Verison: 2.6.x
 

http://forum.pgmfi.org/viewforum.php?f=60

hasnt been much development since its been opensource (that has been shared anyways)...

i have been working on some ecucontrol plugin stuff, but havent posted any TE related updates...unfortunately i dont have the knowledge to do anything but "cosmetic" on TE at this point (which i will post up soon). i will share what i work on, even if there isnt much interest....