Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

ok so if the dual map, run on both boost and vaccum, then you could run either or? So the computer when it senses the vaccum to boost crossover, then it will read off the positive side of the ignition and fuel map correct??

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Yes.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

thats so sweet!! ;D Turboedit i know i want now, I can write me own chips... this is going to work well I think, and hope, I want to atleast break 170-180...with turbo i think i'm going to beable to or atleast come close! but first I need to get my ecu chipped

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.10
 

Good question...anyone?
Also, there is a VTEC mod in the program, is there a way to hook this up to the VTEC controller?

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

what do I exactly need for datalogging?

parts list?

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Check out www.ecucontrol.com

He has FAQ and writeups with part #'s

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

will I be able to control my 750cc injectors with TE?

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

up to 450cc with their auto math, I think you can control them by taking the car to a dyno and creating some new fuel maps.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

thanks....and why is my fuel and ignition table window cutoff at 6300rpm?
here's the link
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

because your windows theme is ------- it up; swtich to classic view and it should work; the other cells are there just hiding

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

thanks..... :)

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

What is up with the vtec thing on Turboedit??

There is a person in my state, fabrik8, he is also on pgmfi.org, and i want to know if his vtec activation on the PM6 will work with turboedit??

The vtec propertie feature in turboedit, does that just change the fuel maps?? or what is that about??

thanks for helping me

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Well, the hardware changes are just a mimic of the PS9's auto lock up solenoid output line, which we're using for VTEC activation.

If fabrik8 can do those hardware changes for you, then yes.

The code is what runs it, the output line just needs to be there.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

So, im still trying to talk to Fabrik, so if he can do it, ill get him to do it because im too much of a newbie. I just definetly want it to work with turboedit!!!! So in order for it to work for Turboedit is has to be through a autolock up from a ps9??

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

either a PS9 or a PM6 with the auto hardware in it.

there is a specific bin that you would need, but worry about the hardware first.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Well, that bin will be _the_ primary bin once it's verified that it works.

Not enough beta testers with complete setups.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Ok, well im waiting on a Zif from the group buy onyx did, and then maybe i can help you test it??? Let me know, im going to get him to do it, and then change the chip!! hahah Turboedit is beast.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

any support for larger injectors? I have some 780s.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

You would have to manually scale your maps for them.

The latency at idle would be enormous and I wouldn't know if you could get an OBD0 ECU to idle them. Smallest pulse duration is 1.08ms...

..you might ask Dave L (leed) or Dave B (blundar), they would know more about it I bet.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

I was trying to find the right max232 to buy for datalogging on a pm6, but i couldnt figure out which one I needed.

A232DBK
Max232 RS232 Serial I/O Kit
$13.00
$3.00
$16.00


A232DBA
Max232 RS232 Serial I/O Kit Assembled
$18.00
$4.00
$22.00


A232DBH
Max232 RS232 I/O Assembled with hood kit
$20.00
$4.00
$24.00


which one is it?

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

http://www.compsys1.com/workbench/On...3_adapter.html

Model AD233AK $19.00

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

I just socketed my computer, turboef9 can u help me do the thing to convert the p28 values to my pm6 so I can run this d16z6 fine?

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

So far i just want to compliment you on the work you have done, youve put in an incredible amount of hours and i feel that turboedit is not far away from being nearly perfected...

that being said.. and if your open to suggestions... would it be possible to have the title bar show the name of the .bin that is currently open? when working with multiple files i sometimes get confused as to which is open, without opening the window and looking at the bottom. thanks!

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Quick Question, Try 11 has real time programing what is that used for? Is that just like Zdyne, you can tune the ecu while its in the car?

IF so how do you connect the ecu to your laptop to be able to change the chip?

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

RTP board from PGMFI, or something similar.. I don't think it has xtronics romulator support..

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Is the turboedit site still up? I have ver 2.0.11 can't get the advance open to work. I'm trying look at a PK2 bin.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

the site is still up, yes... advanced open was disabled I believe, awaiting someone to build a plugin for it.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

any one have a ls-vtec tune? or semi tune for a pr4. or maby just ported/spliced b16/b18 maps

thanks
-joseph

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Dustin (turbohf) might have an old map that he tuned when he used to use TurboEDIT.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

is that na or fi?

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Would it matter? The VE curve in vacuum isn't _that_ different naturally aspirated to boost.

With that in mind, one could then use the vacuum maps to custom generate boost maps with the TE automated functions.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Not with NG48....

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

...why not?

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Cuz the column headings read all funky when you open Ng48 in TE 2.0.11

Wow...no one has posted here in over a month

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

wow i just noticed my logo i made in xenocron's signature..

lol

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

So TurboEdit as of now is only good for people running up to 450cc injectors?

I really wanna try and atleast get the jist of this program but cant find the time to even try and make a basemap, and if Im going to be shooting for 400whp on an SC61, Ill need the bigger injectors.

Ive got my own wideband and laptop

Most likely going to drive down to meet xenoncron (all the way from Ontario, Canada) throw him some money and get me a nice tune and a little lesson.

Ofcourse that wont be until March or so, so Ive got time to learn

It just seems so dam hard to get the first grasp of the program then build off on that, know what Im saying..

You guys definetely deserve some major appreciation as Im sure you arent making much if any money off of this program and all the time you dump into it

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Ok question. With OBD0 can you get the ecu to run a D16Z6 and activate the vtec from the computer with out changing any wires at the ecu or do you have to splice some in. Because I don't want to cut any wires on this thing. I just put a new chassis and engine harness in it because i was trying to run OBD1. That sucked. This is all I ask. My car sits in my driveway more than it runs. Please help.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

You would need to run a PS9 ECU and use the auto lockup solenoid (i forget the Pin #) from the ECU directly to the VTEC solenoid...and then set your activation point in TurboEdit.

Or get an RPM activated switch and enable VTEC that way, while splicing your maps together in the single map in TurboEdit

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

ok so what does a PS9 ecu come out of. Integra or auto civic.
By the way for some reason I can't download turboedit from that website. the source file couldn't be read or some ---- like that.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

PS9 comes out of a 90-91 Civic EX Automatic