TurboEF9

I have a library started on the website.

..e-mail me your name and .exp (make sure they are commented with engine type, injector size, boost/na, that sort of thing) and I'll post them there, with author credit.

Chris Harris

Turbohf,

Im not totally sure but I think try21 had some issues that were fixed in the StableRom.

Also, the cell in the Pm6 can be fixed by using George's PM7 BIN...it will still blink 20 times for the ELD, but the cell light will be off.

Would you be willing to send me your b18a tune...i want to see how it comepares to mine?

cwharris@optonline.net

turbohf

well i think i cut and pasted my maps to the stablerom also...i will email you the bin...

TheShocker

For datalogging is Part # AD233AK the correct serial adapter to buy? Or is it a different one?

( from: http://www.compsys1.com/workbench/Be...ch_orders.html and http://www.compsys1.com/workbench/Be...lipic_pcb.html )

Also, is the following correct that MR_DR_PEP posted?


TX-|-> PIN 4 (RX)

RX-|-> PIN 2 (TX)

+5V-|-> PIN 3 (NOT USED IF USING USB ADAPTER)

GND-|-> PIN 1 (GND)

| PIN 5 NOT USED

Thanks!
-Seth

TurboEF9

Correct.

TheShocker

Crap, I edited my post as you were replying... now I'm all confused. Which one is the right one to buy?

Thanks!

TurboEF9

AD233AK
233A Serial I/O Kit
$19.00
$4.00
$23.00


(This is the first one in the "RS232 Adapter Kits" section)

warric_k

I want to make sure I understand this pgmfi thing... and I'm way too scared to post there =).

the rtp board by blundar.. I connect that onto the ecu, and then how do I can control that?

I searched as much as I could on the pgmfi forum, but I can't find what to cut, where and everything. is there a base post that I can't find?

what advantages does this have over the romulator? what is the cheapest way to go about rtp?

TheShocker

Thanks Jason.

cottagecreep

Ok Jason, I have been following turboedit since its beggining, and am a current ghettodyne user. I have been out of the loop for a little bit, and have returned lost. I am installing my turbo setup, and would love to test your editor, and or any roms you want.

Here is my setup, what do you suggest, I need a base for me to get started, I am not that advanced I honestly have troubles with this stuff...lol.

D16A6 rebuilt head ported and polished
14b turbo
450cc injectors
Apexi Safc
PM6 chipped computer
Batronix 3.3 programmer
turbonetics MBC
Greddy type s bov
FMIC w 2.5" Mandrel ic piping
2.5 mandrel downpipe and exaust
etc