WTF??!!??!?!?!?!?!??!
05-29-2008, 08:52 PM
#2
0.0 BAR
Join Date: Jun 2003
Posts: 0
Re: b series swap list
Originally Posted by 78NOVA
ok after thinkin about ---- here and there i wanna go to a b series engine because after reading about what chris said and others, it seems as though its the better choice in the long run after everything is said and done. i started to compile a parts list and i think i know waht i need to get, but i just want to make sure im doing this right. i already got a good heads up on my parts because of parts galore. the motor will be rebuilt from the ground up to ensure a good healthy running engine.
B18A1/B2 motor
b series into ef mounts
b series trans
b series axles
90-91 integra knuckles or 91 civic sedan ex knuckles
pr4 obd1 ecu(Im converting to obd1)- i already have this item
can i use my current engine harness which was mpfi converted and currently driving with d series, then get obd1 conversion harness.
as far as i can think this is all i would need from the junkyard to get me started. the only thing thats gets me is the steering knuckles and hubs. thats one of the reasons why i made this thread. i should be heading to the junkyard saturday and picking everything up. gotta love the import section.
B18A1/B2 motor
b series into ef mounts
b series trans
b series axles
90-91 integra knuckles or 91 civic sedan ex knuckles
pr4 obd1 ecu(Im converting to obd1)- i already have this item
can i use my current engine harness which was mpfi converted and currently driving with d series, then get obd1 conversion harness.
as far as i can think this is all i would need from the junkyard to get me started. the only thing thats gets me is the steering knuckles and hubs. thats one of the reasons why i made this thread. i should be heading to the junkyard saturday and picking everything up. gotta love the import section.
05-29-2008, 08:59 PM
#3
3.0 BAR
Thread Starter
Join Date: Dec 2005
Posts: 2,299
Re: b series swap list
Originally Posted by crxvtec91
Yes on wiring, also need shaft linkage. 91 ex knuckles are a better choice, but almost the same thing. There is a sponsor on here ProjectDC2 that sells mounts at killer prices. Any other questions?
05-30-2008, 12:15 AM
#6
3.0 BAR
Join Date: Jun 2005
Posts: 2,753
Re: b series swap list
damn how many projects you got going? im not sure on the harness part, but i have done a regular mpfi harness with the obd1 harness and it worked, but i dont know about the dpfi harness. sounds like it should be the same.
05-30-2008, 03:52 AM
#8
3.0 BAR
Thread Starter
Join Date: Dec 2005
Posts: 2,299
Re: b series swap list
Originally Posted by chris
mpfi=mpfi
you have to extend a couple wires thats it
Best bet is just find a wrecked integra every part you need and then get a low mileage jdm b20b block from me
you have to extend a couple wires thats it
Best bet is just find a wrecked integra every part you need and then get a low mileage jdm b20b block from me
05-30-2008, 04:34 AM
#9
3.0 BAR
Join Date: Oct 2005
Posts: 9,282
Re: b series swap list
dont ---- arround and just go STRAIGHT to 91 ex knuckles complete from the jy spindle and all 
also dont ---- arround and pay to have your wiring harness swapped at rywire..
basically you send em the obd0 harness and the obd1 harness and they swap everything for ya repin ---- splice ---- and give you a working good to go harness and your all ------- set
source out a local screw ma and pa shop and make them your best friends
also i have a p75 ecu for i beileve an integra ls...
so let me know if jooo want to buy it
also dont ---- arround and pay to have your wiring harness swapped at rywire..
basically you send em the obd0 harness and the obd1 harness and they swap everything for ya repin ---- splice ---- and give you a working good to go harness and your all ------- set
source out a local screw ma and pa shop and make them your best friends
also i have a p75 ecu for i beileve an integra ls...
so let me know if jooo want to buy it
05-30-2008, 07:59 AM
#10
3.0 BAR
Thread Starter
Join Date: Dec 2005
Posts: 2,299
Re: b series swap list
Originally Posted by buk9tp
dont ---- arround and just go STRAIGHT to 91 ex knuckles complete from the jy spindle and all
also dont ---- arround and pay to have your wiring harness swapped at rywire..
basically you send em the obd0 harness and the obd1 harness and they swap everything for ya repin ---- splice ---- and give you a working good to go harness and your all ------- set
source out a local screw ma and pa shop and make them your best friends
also i have a p75 ecu for i beileve an integra ls...
so let me know if jooo want to buy it
also dont ---- arround and pay to have your wiring harness swapped at rywire..
basically you send em the obd0 harness and the obd1 harness and they swap everything for ya repin ---- splice ---- and give you a working good to go harness and your all ------- set
source out a local screw ma and pa shop and make them your best friends
also i have a p75 ecu for i beileve an integra ls...
so let me know if jooo want to buy it
wiring isnt an issue for me. i had to rewire most the car to start with because of field mice. plus i mpfi swapped the car myself with no issues at all. ive done everything to my car with no ones help and dont plan to have any shop touch my car.
and why is a p75 any better than a pr4? why would i buy something i already got? if thats the case ill run the bitch obd0 and off my pr5 or pm6 i have. well ---- i also have an obd0 pr4 as well. so many options.....
