HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   WTF??!!??!?!?!?!?!??! (https://www.homemadeturbo.com/hybrid-tech-8/wtf-92425/)

78NOVA 05-29-2008 08:16 PM

WTF??!!??!?!?!?!?!??!
 
1 Attachment(s)
little surprise for you all.......
Attachment 17323
FABLAD

and you all thought i was that ------- dumb, so easy to get you on the bandwagon..........d series for life nigga's!!!!!!!!!!!


seerex 05-29-2008 08:52 PM

Re: b series swap list
 

Originally Posted by 78NOVA
ok after thinkin about ---- here and there i wanna go to a b series engine because after reading about what chris said and others, it seems as though its the better choice in the long run after everything is said and done. i started to compile a parts list and i think i know waht i need to get, but i just want to make sure im doing this right. i already got a good heads up on my parts because of parts galore. the motor will be rebuilt from the ground up to ensure a good healthy running engine.

B18A1/B2 motor
b series into ef mounts
b series trans
b series axles
90-91 integra knuckles or 91 civic sedan ex knuckles
pr4 obd1 ecu(Im converting to obd1)- i already have this item
can i use my current engine harness which was mpfi converted and currently driving with d series, then get obd1 conversion harness.

as far as i can think this is all i would need from the junkyard to get me started. the only thing thats gets me is the steering knuckles and hubs. thats one of the reasons why i made this thread. i should be heading to the junkyard saturday and picking everything up. gotta love the import section.



Yes on wiring, also need shaft linkage. 91 ex knuckles are a better choice, but almost the same thing. There is a sponsor on here ProjectDC2 that sells mounts at killer prices. Any other questions?

78NOVA 05-29-2008 08:59 PM

Re: b series swap list
 

Originally Posted by crxvtec91
Yes on wiring, also need shaft linkage. 91 ex knuckles are a better choice, but almost the same thing. There is a sponsor on here ProjectDC2 that sells mounts at killer prices. Any other questions?

i do know about the shift linkage. but its not going in right away. so im not concerned at this point in time. so i can use 90-91 teg knuckels? because last time i was there, there was only 1 4 door sedan that i could get parts off of, and it may be gone. its been about 2 months since ive been there.

Gold DA9 05-29-2008 10:14 PM

Re: b series swap list
 
so you guys are saying i cant se my 91 dx axles?

78NOVA 05-29-2008 10:16 PM

Re: b series swap list
 

Originally Posted by Gold DA9
so you guys are saying i cant se my 91 dx axles?

i specifically said EX.

RotaryGeek 05-30-2008 12:15 AM

Re: b series swap list
 
damn how many projects you got going? im not sure on the harness part, but i have done a regular mpfi harness with the obd1 harness and it worked, but i dont know about the dpfi harness. sounds like it should be the same.

Guy-Fast 05-30-2008 01:10 AM

Re: b series swap list
 
mpfi=mpfi


you have to extend a couple wires thats it



Best bet is just find a wrecked integra every part you need and then get a low mileage jdm b20b block from me :6

78NOVA 05-30-2008 03:52 AM

Re: b series swap list
 

Originally Posted by chris
mpfi=mpfi


you have to extend a couple wires thats it



Best bet is just find a wrecked integra every part you need and then get a low mileage jdm b20b block from me :6

The problem there is idont want to pay any shipping charges. Plus the integra has everything omit including the motor that I don't mind rebuilding.

buk9tp 05-30-2008 04:34 AM

Re: b series swap list
 
dont ---- arround and just go STRAIGHT to 91 ex knuckles complete from the jy spindle and all :3

also dont ---- arround and pay to have your wiring harness swapped at rywire..
basically you send em the obd0 harness and the obd1 harness and they swap everything for ya repin ---- splice ---- and give you a working good to go harness and your all ------- set

source out a local screw ma and pa shop and make them your best friends

also i have a p75 ecu for i beileve an integra ls...

so let me know if jooo want to buy it

78NOVA 05-30-2008 07:59 AM

Re: b series swap list
 

Originally Posted by buk9tp
dont ---- arround and just go STRAIGHT to 91 ex knuckles complete from the jy spindle and all :3

also dont ---- arround and pay to have your wiring harness swapped at rywire..
basically you send em the obd0 harness and the obd1 harness and they swap everything for ya repin ---- splice ---- and give you a working good to go harness and your all ------- set

source out a local screw ma and pa shop and make them your best friends

also i have a p75 ecu for i beileve an integra ls...

so let me know if jooo want to buy it

whats so wrong with the teg knuckles? i think they would be fine. if i cant find a set saturday at parts galore then the teg ones will be it. im going one time to get this and i know its there.

wiring isnt an issue for me. i had to rewire most the car to start with because of field mice. plus i mpfi swapped the car myself with no issues at all. ive done everything to my car with no ones help and dont plan to have any shop touch my car.

and why is a p75 any better than a pr4? why would i buy something i already got? if thats the case ill run the bitch obd0 and off my pr5 or pm6 i have. well ---- i also have an obd0 pr4 as well. so many options.....


All times are GMT -5. The time now is 12:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands