setting a tps
08-17-2008, 01:51 PM
#12
Guest
Posts: n/a
Re: setting a tps
Originally Posted by rudebwoy
I can use zeitronix to do it also, and s300, but I rather do it by the manual, plus its easier.
08-17-2008, 07:58 PM
#13
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: setting a tps
Originally Posted by rudebwoy
after I installed the 74mm TB from chris , (whatever he called the company)
I took a tps from a b16 throttle body. found the volts that I it to be set at which is 0.49vdc closed, and 4.50vdc. I my test lead in the middle wire on the TPS plug, with ignition in the on position (motor not running) it should read 0.49 closed, and 4.5 WOT. car runs perfect
I took a tps from a b16 throttle body. found the volts that I it to be set at which is 0.49vdc closed, and 4.50vdc. I my test lead in the middle wire on the TPS plug, with ignition in the on position (motor not running) it should read 0.49 closed, and 4.5 WOT. car runs perfect
pbtuning
aka polarbeartuning.com
my white trash business I own
08-17-2008, 08:02 PM
#14
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: setting a tps
Originally Posted by rudebwoy
after I installed the 74mm TB from chris , (whatever he called the company)
I took a tps from a b16 throttle body. found the volts that I it to be set at which is 0.49vdc closed, and 4.50vdc. I my test lead in the middle wire on the TPS plug, with ignition in the on position (motor not running) it should read 0.49 closed, and 4.5 WOT. car runs perfect
I took a tps from a b16 throttle body. found the volts that I it to be set at which is 0.49vdc closed, and 4.50vdc. I my test lead in the middle wire on the TPS plug, with ignition in the on position (motor not running) it should read 0.49 closed, and 4.5 WOT. car runs perfect
hows your throttle response with the new throttle body?
I just bored out a 65mm throttle body to 74mm inlet-65mm plate on a gsr motor. Throttle response on the car is awesome. Will make those turns road racing very fun.
08-17-2008, 08:31 PM
#15
3.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 9,282
Re: setting a tps
btw if anyone cares i got a new tb but the car still runs like ----.. it does it intermittently..
only code i got now = 10
how would code 10 affect drivability idk..
cars are gay
Code 10 Intake air temperature sensor
only code i got now = 10
how would code 10 affect drivability idk..
cars are gay
Code 10 Intake air temperature sensor
08-18-2008, 06:21 AM
#17
3.0 BAR
Join Date: Mar 2003
Posts: 4,217
Re: setting a tps
Originally Posted by chris
hows your throttle response with the new throttle body?
I just bored out a 65mm throttle body to 74mm inlet-65mm plate on a gsr motor. Throttle response on the car is awesome. Will make those turns road racing very fun.
08-18-2008, 09:28 AM
#18
0.5 BAR
Join Date: Jun 2005
Posts: 115
Re: setting a tps
Originally Posted by jay
i have one side of the meter on the first pin and one side of the meter on the last pin..
3 pins on the tps..
The middle pin is where all the action is. Connect the middle pin to one of the outside pins and try again. If you get a negative voltage use the other outside pin.
Thread
Thread Starter
Forum
Replies
Last Post
