b-series p/s and a/ questions
#5
Guest
Posts: n/a
Re:b-series p/s and a/ questions
Originally Posted by mhorton
Would 1st gen B16A brackets work? I still have the ones I pulled of when I did my swap, had to use a custom bracket for a/c and don't have p/s.
#10
Guest
Posts: n/a
Re:b-series p/s and a/ questions
the ac bracket that will mount your stock compressor to the b16 block is about $75 new from honda. no i don't have the part number, but i do have a pile of them for sale. been using the same ones for years. i guarantee they are correct and use all the hardware intended by the factory. NOT a p30 part number. used ones are $75 shipped with the adjuster pulley and arm.
if must keep the ps you'll need the brackets and pump from a b16 or gsr...don't forget the high presure line will need attention, too.
if must keep the ps you'll need the brackets and pump from a b16 or gsr...don't forget the high presure line will need attention, too.
Thread
Thread Starter
Forum
Replies
Last Post
rsmith2786
Hybrid/Tech
14
07-10-2007 09:09 AM