ok.. i measured my sleeves and they are all over the place. 1=74.56mm 2=74.74 3=74.27 4=74.80. and my pistons across the top are 74 mm. they are srp dome pistons. my question is srp doesnt make a 74mm piston, so i guess my ruler thingamagig is off. right? so that would bring everything up to 75mm which sounds right. right?? ok next.... oil is the only thing that goes between the crank and the bearings and the rod and the bearings. plastigauge is what. and how do i determine what the correct clearence is between the bearings and rod and crank. im about to put all my ---- back together and not quite sure how. any help web site addys would be great. thanks

 

www.c-speedracing.com has a decent write up on this (Lsvtec/B20vtec assembley), but covers some of your questions.

 

yea it's exactly what i needed thanks alot

 

ruler thingamagig? please tell me you didnt use a regular ruler?

 

you gotta use calipers.

www.plastigauge.com

they show u how u do it.

 

no i used the right tool for the right job.