neuspeedescort

i personally have a miata turbo header from them. its a commonly used design on my car due to having the same head design due to me having a mazda motor in my escort. i got mine for like 50 bucks for the soul intetion of getting it duplicated. how could i pass up a 50 buck turbo header just to duplicate with better matterial. but as stated by many and i will say also. for the price its nice. but it comes down to "what you pay for is what you get"

NEUMAN

NAsucks

Hey I'm going to be runnin a Te04H my Idea is to weld the turbo adapter directly to the stock manifold ( cut and cleaned of course) For such a small turbo and budget wise I think its a good Idea. I've seen it done before. What do you guys think. It couldn't be any worse than what SS was selling.

neuspeedescort

isn't that one of the turbos off a 3kgt tt? those things are tiny! you will over spool it pretty fast. but if im wrong then don't listen to me.

NEUMAN

Reddy

There have been many HMT kits using stock manifolds and adapter plates and they all had good sucess. If you can get away with being able to bolt an adapter plate to the manifold it would be better becuase welding cast sucks.

NAsucks

I'm talking with a gentleman from overboost.inc and he says that you can install a T25 or T28 compressor wheel and that should yeild me a higher onset of boost. right now that turbo hits its peak at 3200 RPM and I need about 3600 more so with porting, clipping and the upgraded compressor wheel I should be able to get close. to my projected 6800 RPM redline. I'll let you know how it comes out!

illtww

Hey Jeff,

few Questions..

1. Does he provide a warranty on his turbos? (probbly be a good thing to help with all the bad pub....)

2. Is there a link or any feedback on the T70 and T60-1 Turbos he is selling? I am plannin on a t60-1 and mani for a 95 240sx.. (t70 for a mitsu 3.0)

3. I live in charlotte,nc and he is honestly only about 30 mins form me.... I wonder if he would let me check ---- out...

Thanks,
Travis
p.s. I have been browsing this site for around a year or two. (i loved that chevy truck on the front page.. Funkin scary lookin!!!!)

neuspeedescort

true if you run the smaller hot side and a bigger cold side it will spool low and have nice power all the way up.

NEUMAN

illtww

I am really intrested in the t-70's and t-60... any input on these from the board?

NAsucks

true if you run the smaller hot side and a bigger cold side it will spool low and have nice power all the way up.

NEUMAN
I hope so I'll let you know! I'm looking for about JAN to be spoolin

neuspeedescort

it should totally work. my buddy did a garrett t3 cold side on the same ihi hot side i have and boosted 19psi and dropped a full second off his 1/4 and made 4th gear chrp. it will work!

NEUMAN