crx project v1.154345
#115
Re: crx project v1.154345
Originally Posted by Joseph Davis
Any manifold except B1, B8, and B6 is going to have bigger port runners than the head has.
Best sticking with the B6 IM you currently have. The HF engine is a dog engine, nothing is going to fix that.
Best sticking with the B6 IM you currently have. The HF engine is a dog engine, nothing is going to fix that.
anyone have a intake mani i can buy
#117
Re: crx project v1.154345
If your trying to get the ball joints out you can either heat the arm with an acetylene/oxy combo (be careful you don't get too close to the wheel bearing), and hammer it out. Or you'll have to press it out with a hydraulic press. I did both on my EG, one came out with torch/hammer, the other needed more persuasion from the press at my dad's shop.
#118
Re: crx project v1.154345
Originally Posted by E-b0la
If your trying to get the ball joints out you can either heat the arm with an acetylene/oxy combo (be careful you don't get too close to the wheel bearing), and hammer it out. Or you'll have to press it out with a hydraulic press. I did both on my EG, one came out with torch/hammer, the other needed more persuasion from the press at my dad's shop.
so heh..
imma cut it with a hack saw tomorrow and take care of it...
now please go into more details about how to change the ball joint.. is it worth doing yourself or should i just take it to a shop?
are c clamps enough to press the ****** in or do i need a vise?
#119
Re: crx project v1.154345