sill having problems
#1
sill having problems
I replaced the dist. cap and rotor, but it has the same problem as the first time, about 5000 rpm, you can hear popping noise from the exhaust, but it only happens on WOT. Anyonehave this problem.
#3
Re:sill having problems
what is your plug gap? tighten it up, if u havent already. i had that prob on my honda..left it at stock .044(dont ask) reduced it to .030 now the problem is gone. Also what's your timing at? it should be retarded...usually around .75 degrees per 1psi(ex. 8 psi = 6 degrees retard). though timing would usually cause detonation. just a suggestion dont know what you have already tried.
Thread
Thread Starter
Forum
Replies
Last Post
alldriver28
Engine Management
1
11-17-2003 01:10 PM