Forced Induction Custom FI Setup Questions

sill having problems

Thread Tools
 
Search this Thread
 
Old Nov 8, 2003 | 07:59 PM
  #1  
4Nobjct's Avatar
Thread Starter
0.0 BAR
 
Joined: Oct 2003
Posts: 30
Default sill having problems

I replaced the dist. cap and rotor, but it has the same problem as the first time, about 5000 rpm, you can hear popping noise from the exhaust, but it only happens on WOT. Anyonehave this problem.
Old Nov 8, 2003 | 08:36 PM
  #2  
Civic4Sale's Avatar
1.0 BAR
 
Joined: Oct 2003
Posts: 462
Default Re:sill having problems

i have the same problem. But it's nothing big. It's something to do with the oil. But forgot what.
Old Nov 9, 2003 | 11:36 AM
  #3  
SleepinEH's Avatar
0.5 BAR
 
Joined: Apr 2003
Posts: 71
Default Re:sill having problems

what is your plug gap? tighten it up, if u havent already. i had that prob on my honda..left it at stock .044(dont ask) reduced it to .030 now the problem is gone. Also what's your timing at? it should be retarded...usually around .75 degrees per 1psi(ex. 8 psi = 6 degrees retard). though timing would usually cause detonation. just a suggestion dont know what you have already tried.
Old Nov 9, 2003 | 12:50 PM
  #4  
warren_teg's Avatar
1.5 BAR
 
Joined: May 2003
Posts: 1,024
Default Re:sill having problems

it's your internal coil.
Old Nov 9, 2003 | 07:34 PM
  #5  
4Nobjct's Avatar
Thread Starter
0.0 BAR
 
Joined: Oct 2003
Posts: 30
Default Re:sill having problems

Timing is 2 degrees retarded on the dist. and .3 on the BTM. I have all MSD ignition . How could the oil make that problem.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
varexsi
Forced Induction
20
Nov 20, 2003 11:39 PM
alldriver28
Engine Management
1
Nov 17, 2003 01:10 PM
aron2063
Forced Induction
18
Nov 4, 2003 07:02 PM
varexsi
Forced Induction
9
Oct 21, 2003 01:57 PM
ONIN
Forced Induction
8
Jun 30, 2003 01:04 AM




All times are GMT -5. The time now is 05:23 AM.