Oil Supply for Holset

Reply Subscribe

Thread Tools

Search this Thread

Nov 6, 2008 | 08:32 PM

#11

Minor Threat

3.0 BAR

Joined: Mar 2004

Posts: 1,729

Re: Oil Supply for Holset

I run -4an line, no restrictor. HY35 off an 01 Cummins

Nov 6, 2008 | 08:52 PM

#12

TomBones

Thread Starter

0.0 BAR

Joined: Sep 2007

Posts: 0

Re: Oil Supply for Holset

Quote:

Originally Posted by SDRAWKCAB

http://www.pegasusautoracing.com/pro...asp?RecID=5055 4an
http://www.pegasusautoracing.com/pro...asp?RecID=5054 3an
I think its this fitting
I got mine from the local hydraulic shop.
I can check for you tomorrow.

****, Ordering it now

Nov 7, 2008 | 12:09 AM

#13

darkhorizon

0.5 BAR

Joined: Sep 2007

Posts: 75

Re: Oil Supply for Holset

I got my o-ring fitting from a hydrolic shop. $4 or so for my entire oil line setup.

Nov 7, 2008 | 01:25 AM

#14

aero

1.0 BAR

Joined: Dec 2006

Posts: 311

Re: Oil Supply for Holset

Quote:

Originally Posted by malichite

****, Ordering it now

The HE351VE that I have has a completely different size than the HX40 that I had before. You should verify that it fits the HE351VE before you order it. IIRC it was quite a bit bigger than the HX40 oil fitting.

Nov 7, 2008 | 02:16 AM

#15

SDRAWKCAB

3.0 BAR

Joined: Jul 2006

Posts: 2,349

Re: Oil Supply for Holset

Quote:

Originally Posted by malichite

****, Ordering it now

Ok well i guess I don't need to check then.
I hope it works out for you.

Nov 7, 2008 | 02:43 AM

#16

TomBones

Thread Starter

0.0 BAR

Joined: Sep 2007

Posts: 0

Re: Oil Supply for Holset

Got distracted and didn't get it ordered yet. I have one of those right now but it goes to -6. Think I will order the -3 so I dont need to get new oil lines.

And just for the hell of it

Nov 7, 2008 | 02:56 AM

#17

lock-pop!

0.0 BAR

Joined: Mar 2006

Posts: 0

Re: Oil Supply for Holset

^^^^damn that thing is a monster

Nov 7, 2008 | 10:24 AM

#18

SDRAWKCAB

3.0 BAR

Joined: Jul 2006

Posts: 2,349

Re: Oil Supply for Holset

Quote:

Originally Posted by malichite

Got distracted and didn't get it ordered yet. I have one of those right now but it goes to -6. Think I will order the -3 so I dont need to get new oil lines.

I couldn't remember if it was the right thread type.
Good luck.
D SERIES POWA!

Nov 8, 2008 | 08:36 PM

#19

omniscient

0.5 BAR

Joined: Mar 2006

Posts: 74

Re: Oil Supply for Holset

My holset came without the stock inverted flare fitting that people thread the m12x1.25 fitting into. I had to use a gas tank coupler and tap the inside to m12x1.25 and used that. Then I drilled out the fitting and tapped it for a set screw with a 1/16th hole in it.