it opens boost drops, then closes, the opens boost drops, then closes.
wtf, i can't figure this ---- out. it came new with my cdm 16g. i cant get the ****** to work right. any clues? carb spring?

 

There ya go.

 

your wg hole is the size of virgin -------

 

That is true, but wouldnt that make me overboost?
i hit 8lbs then it drops, i can hear it open(open dump). i just want to see if anyone has had this problem, before i but a used 14b wg or go ghetto with a carb spring

i've tested it with the air gun to the line, and it opens fine, and seems to close fluidly, but i don't know. its really starting to **** me off

 

Non-cdm stock MHI 16g wastegate will do this too. My teg made 17psi and would immediately drop to 14psi regardless of the clocking or any other ghetto-rigging I attempted.

External gate is the only sure-fire solution.

 

Its surging up then slamming the shitty wg open, then dropping back down..wg slams shut.. bad design. Try porting the wg hole.

 

i will probably do that this winter, but im also gonna look for a 14b one i guess. or i can rig my t25 one to work

 

I have a T3 internal wastegate setup I'm not using.. lmk if you want it or even just the actuator

 

ill try the t25 one before i spend money on a diff. one. but i may be interested