Need help or suggestion.. I'm fuking pumped out of ideas
06-09-2008, 06:45 AM
#11
0.0 BAR
Thread Starter
Join Date: Apr 2008
Posts: 45
Re: Need help or suggestion.. I'm fuking pumped out of ideas
haha.. i know, a truly HMT style aye.. hahaha.. I might spray over some HI- TEMP paint just to help the plastic hold out against the engine heat.. haha..
What an idea
What an idea
06-09-2008, 08:05 AM
#12
3.0 BAR
Join Date: Oct 2005
Location: St. Augustine FL
Posts: 3,936
Re: Need help or suggestion.. I'm fuking pumped out of ideas
it will melt unless its after the intercooler. Its also very slick and would probably slip off. There are tons of other problems I can think of that I dont want to type on my phone, but you might as well give it a shot since nobody else has
06-09-2008, 08:38 AM
#13
3.0 BAR
Join Date: Jan 2007
Posts: 1,563
Re: Need help or suggestion.. I'm fuking pumped out of ideas
If the coke bottle is going to be put anywhere inside the engine bay I believe its still going to get REALLY hot, I could see it work as being a way to connect the intercooler to the charge piping behind the bumper. Its not so hot down there, but anyways... good luck with that one
06-09-2008, 09:09 AM
#14
0.0 BAR
Thread Starter
Join Date: Apr 2008
Posts: 45
Re: Need help or suggestion.. I'm fuking pumped out of ideas
Originally Posted by PhilStubbs
it will melt unless its after the intercooler. Its also very slick and would probably slip off. There are tons of other problems I can think of that I dont want to type on my phone, but you might as well give it a shot since nobody else has
06-11-2008, 02:41 PM
#17
1.5 BAR
Join Date: Mar 2005
Posts: 723
Re: Need help or suggestion.. I'm fuking pumped out of ideas
I guess this dumbass isn't aware that most parts we buy in USA/Europe are originally made in Asia? He's paying markup for shipping over the pacific, then for shipping back accross.
FYI if you even consider using a coke bottle as an engine part, there's no ------- way you ever needed 3" in the first place. They more than likely have large transport trucks in your country, and that means they should sell radiator hoses for them. You should be able to get some that are 2" ID, which will work for 400whp, but still clamp down to 1.75".
FYI if you even consider using a coke bottle as an engine part, there's no ------- way you ever needed 3" in the first place. They more than likely have large transport trucks in your country, and that means they should sell radiator hoses for them. You should be able to get some that are 2" ID, which will work for 400whp, but still clamp down to 1.75".
06-12-2008, 04:53 AM
#18
0.0 BAR
Thread Starter
Join Date: Apr 2008
Posts: 45
Re: Need help or suggestion.. I'm fuking pumped out of ideas
Originally Posted by HiProfile
I guess this dumbass isn't aware that most parts we buy in USA/Europe are originally made in Asia? He's paying markup for shipping over the pacific, then for shipping back accross.
FYI if you even consider using a coke bottle as an engine part, there's no ------- way you ever needed 3" in the first place. They more than likely have large transport trucks in your country, and that means they should sell radiator hoses for them. You should be able to get some that are 2" ID, which will work for 400whp, but still clamp down to 1.75".
FYI if you even consider using a coke bottle as an engine part, there's no ------- way you ever needed 3" in the first place. They more than likely have large transport trucks in your country, and that means they should sell radiator hoses for them. You should be able to get some that are 2" ID, which will work for 400whp, but still clamp down to 1.75".
thanks, I will look into buying some truck radiator hoses.
P.S, I already know im a dumbass..don't have to remind me
Cheers!
Thread
Thread Starter
Forum
Replies
Last Post
Tell Me Turbo
Forced Induction
25
07-09-2004 12:11 AM
