i have seen them on ebay and you run a line from the breather to the catch can and the pcv.
http://cgi.ebay.com/ebaymotors/ws/eB...category=46098

 

just do what's in the link above.you need vacuume to suck out the vapors from the crank case. empty out the pcv valve hollowed,jb weld it back together, and set up the catch can how it shows in the link.

 

im just asking if that one would work good. im turboing my ---- real soon, will it bo ok for a lil bit before i get a catch can setup

 

it'll be fine there are alot of guys that dont' even run them so......

 

Since my PVC is working properly disconnected from the intake, I will just run the setup:

Valve Cover(where you would put the breather) --------> Catch Can -------> Pre-Turbo Intake

If I end up having any problems, then I will have to wire the catch can for the PVC.