help with slipping clutch issue & 1/4 guesstimate
#1
help with slipping clutch issue & 1/4 guesstimate
Well I had my car boosted for like a month now, its not a daily driver im basically building it for all out race.
I had to buy a g-tech because the tracks have closed in my area til spring.
The best 0-60mph I could pull was 6.3 but the clutch (its stock) is slipping very bad.
I found an area to run the ¼ mile at and to try to get a good drive out of the car, I didn’t heat up the tires or get on it before I did the run, because I knew the clutch would slip so I drove it normal, not in boost until I got to the area.
Gave her a run and I pulled a 14.6 but….my Et speed was 106mph, anyone every had a clutch slipping this bad on them, I plan to change it, I just brought a 6puck stage 3 clutch. But I wanted to know if anyone had any guesstimates of what I might have ran with this ET time and my clutch not slipping
I know I drove the car 2 days ago to tech school and my and my buddy drove back (he has a SRT, think he’s running 12-15psi) and once we both got on it (we played trailing each other on the freeway, just going thru traffic) I could pull on him even with the slipping clutch.
O for those that don’t know my cars a 90accord DSM turbo set up running uberdata at 10psi.
Thanks….
I had to buy a g-tech because the tracks have closed in my area til spring.
The best 0-60mph I could pull was 6.3 but the clutch (its stock) is slipping very bad.
I found an area to run the ¼ mile at and to try to get a good drive out of the car, I didn’t heat up the tires or get on it before I did the run, because I knew the clutch would slip so I drove it normal, not in boost until I got to the area.
Gave her a run and I pulled a 14.6 but….my Et speed was 106mph, anyone every had a clutch slipping this bad on them, I plan to change it, I just brought a 6puck stage 3 clutch. But I wanted to know if anyone had any guesstimates of what I might have ran with this ET time and my clutch not slipping
I know I drove the car 2 days ago to tech school and my and my buddy drove back (he has a SRT, think he’s running 12-15psi) and once we both got on it (we played trailing each other on the freeway, just going thru traffic) I could pull on him even with the slipping clutch.
O for those that don’t know my cars a 90accord DSM turbo set up running uberdata at 10psi.
Thanks….
#2
Re:help with slipping clutch issue & 1/4 guesstimate
on slicks with a b18 t3/to4b 11psi i ran a 12.7 at 107 good clutch. on built z6 t3/t04e 11psi i hit 12.6 at 110 on slicks (w/ a broke *** tranny that i had to fight with to get 2nd, ie 2 borken shift forks). these are both in heavy coupes.
#3
Re:help with slipping clutch issue & 1/4 guesstimate
yeah, my cars pretty lite for what it is.
ive gutted everything from the backseat to the trunk compartment.
for the front i still have everything cept stock seats, and under the hood ive removed everything that i dont need, A/c, lines, PS, lines, and some more stuff. so i got it at a decent weight for a sedan. i just cant wait to throw the new clutch in and feel the difference. like after 4k, u can just feel the clutch slip, it has no clamping force what so ever. plus i did the clutch slippage test, and man.....lol
car stayed runing for like 5-7 seconds....lol blew my mind
ive gutted everything from the backseat to the trunk compartment.
for the front i still have everything cept stock seats, and under the hood ive removed everything that i dont need, A/c, lines, PS, lines, and some more stuff. so i got it at a decent weight for a sedan. i just cant wait to throw the new clutch in and feel the difference. like after 4k, u can just feel the clutch slip, it has no clamping force what so ever. plus i did the clutch slippage test, and man.....lol
car stayed runing for like 5-7 seconds....lol blew my mind
Thread
Thread Starter
Forum
Replies
Last Post
TunerToys
Turbo Parts For Sale
16
10-01-2007 12:20 PM