Burning oil in boost
#1
Burning oil in boost
I just put a new turbo kit on my accord. The turbo is a new SSAUTOSHIT t3/ t04e .50 A/r compressor .63 A/r exhaust, i did the usual for the oil feed line off the oil pressure sensor port. I noticed when in boost i can smell oil burning, so i put a needle valve on it and eye balled the adjustment. My question is what is a good oil pressure to run the turbo. I did drive it a few days with 80 psi oil pressure going to the turbo, did i mess anything up in the turbo because of that?
#3
Re: Burning oil in boost
I used this... http://www.wicksaircraft.com/catalog...a786ede7975089
and drilled it out a hair larger with a 1/16th bit.
So far its no smokey for me.
and drilled it out a hair larger with a 1/16th bit.
So far its no smokey for me.
#4
Re: Burning oil in boost
Originally Posted by projectxaccord
I just put a new turbo kit on my accord. The turbo is a new SSAUTOSHIT t3/ t04e .50 A/r compressor .63 A/r exhaust, i did the usual for the oil feed line off the oil pressure sensor port. I noticed when in boost i can smell oil burning, so i put a needle valve on it and eye balled the adjustment. My question is what is a good oil pressure to run the turbo. I did drive it a few days with 80 psi oil pressure going to the turbo, did i mess anything up in the turbo because of that?
hope that helps
#5
Re: Burning oil in boost
Originally Posted by c b 9
Thread
Thread Starter
Forum
Replies
Last Post