Burning oil in boost
 

I just put a new turbo kit on my accord. The turbo is a new SSAUTOSHIT t3/ t04e .50 A/r compressor .63 A/r exhaust, i did the usual for the oil feed line off the oil pressure sensor port. I noticed when in boost i can smell oil burning, so i put a needle valve on it and eye balled the adjustment. My question is what is a good oil pressure to run the turbo. I did drive it a few days with 80 psi oil pressure going to the turbo, did i mess anything up in the turbo because of that?

Re: Burning oil in boost
 

Sorry for jaking ur thread but can someone post a link to that regulator that controlls how much of oil turbo gets.
Thank you in advance.

Re: Burning oil in boost
 

I used this... http://www.wicksaircraft.com/catalog...a786ede7975089
and drilled it out a hair larger with a 1/16th bit.

So far its no smokey for me.

Re: Burning oil in boost
 

http://www.honda-tech.com/zerothread?id=170223

hope that helps

Re: Burning oil in boost
 

thanks man