b18c1 possibly going turbo... couple questions...
#1
b18c1 possibly going turbo... couple questions...
I recently bought a 94 GSR, and I was planning on going turbo with it, but then a friend dissuaded me from doing that and going all motor instead. I went with the idea for a few weeks, but I've decided to go back to the turbo idea. I was wondering what was needed for a basic turbo setup-- you know, like the basic things that are to be installed/replaced to make it work. I'm on a semi-tight budget, so this will be done over a matter of months. But I want to start soon, not running much more than maybe 4-5 psi at the MOST, if at all. If anyone could help, that would be mucho helpful. Thanks!
#2
Re:b18c1 possibly going turbo... couple questions...
glad you are willing giving turbo a try.
Everything really depends on how much money you have...
If you just want a basic HMT style turbo kit, you might wnat to look into the DSM turbos (the T25 and the 14b). in terms of fuel management, go with DSM 450ccs and uberdata.
Everything really depends on how much money you have...
If you just want a basic HMT style turbo kit, you might wnat to look into the DSM turbos (the T25 and the 14b). in terms of fuel management, go with DSM 450ccs and uberdata.
#3
Re:b18c1 possibly going turbo... couple questions...
I did the same thing as you. Plans changed from all motor set up to turbo. Now im glad I did go turbo.
Parts you need:
1. exhaust manifold(log style, equal runner)$200-$700
2. turbo (t25,t3,t3/t4, anyother junkyard turbo) $50-$800
3. wastegate (only if you don't have an internal) $50-$600
4. intercooler (front mount, side mount) $50-$800
5. blow off valve (dsm, any aftermarket) $25-$300
6. injectors (dsm or aftermarket) $50-$300 DSM inj's require resistor box
7. eng. management (fmu, afc, uberdata etc) $100-$500
8. charge piping (up to you what u want to use) $100-$600
9. oil line kit (stealth mode kit) $75
10. misc. stuff (clamps, hoses etc.)$25-$150
Good luck. 98ctr
Parts you need:
1. exhaust manifold(log style, equal runner)$200-$700
2. turbo (t25,t3,t3/t4, anyother junkyard turbo) $50-$800
3. wastegate (only if you don't have an internal) $50-$600
4. intercooler (front mount, side mount) $50-$800
5. blow off valve (dsm, any aftermarket) $25-$300
6. injectors (dsm or aftermarket) $50-$300 DSM inj's require resistor box
7. eng. management (fmu, afc, uberdata etc) $100-$500
8. charge piping (up to you what u want to use) $100-$600
9. oil line kit (stealth mode kit) $75
10. misc. stuff (clamps, hoses etc.)$25-$150
Good luck. 98ctr
Thread
Thread Starter
Forum
Replies
Last Post
87crexSi
Forced Induction
5
06-05-2008 11:44 PM