HMT= Home Made Traction bars (CSaddict style)Now with test drive results!
05-12-2007, 08:14 PM
#101
0.5 BAR
Join Date: Jun 2005
Posts: 115
Re: HMT= Home Made Traction bars (CSaddict style)Now with test drive results!
Originally Posted by imburne
You bought up this old *** thread to say if anyone uses this design they are a idiot. You are a ------- idiot dumb ----. Where is your writeups for anything? I bet you were googling how to make your own traction bars and you seen a thread on HMT. Your a member so yay! You get to post. But yeah 2 year old thread you bought up to say it was gay? I vote ban.
Originally Posted by imburne
I bet you were googling how to make your own traction bars and you seen a thread on HMT.
05-12-2007, 08:24 PM
#102
3.0 BAR
Join Date: Jun 2006
Posts: 3,256
Re: HMT= Home Made Traction bars (CSaddict style)Now with test drive results!
It was a suggestion to sticky.. Which is a good one. The original link you failed to look at the date??
05-12-2007, 09:17 PM
#103
3.0 BAR
Join Date: Jun 2005
Posts: 1,623
Re: HMT= Home Made Traction bars (CSaddict style)Now with test drive results!
any one going to second 2point2 opinion on the cb7 chassis and traction bars being bad idea
05-12-2007, 10:10 PM
#104
0.0 BAR
Join Date: Jul 2006
Posts: 0
Re: HMT= Home Made Traction bars (CSaddict style)Now with test drive results!
No but i second the motion for him to fist a chicken.
05-13-2007, 10:20 AM
#105
0.5 BAR
Join Date: Jun 2005
Posts: 115
Re: HMT= Home Made Traction bars (CSaddict style)Now with test drive results!
How about I fist your mother with a fisted chicken?
Looks like I haven't been banned yet..
Anyway.
gen4acclude, read all the criticism in this thread. There's a lot of experience in this thread.
The exact same logic for the ef applies to the cb7 as they both use a radius rod to keep the front knuckle from flying through the fender. You also have to keep in mind that the cb7 weighs more so the flaws in this design would be amplified.
I'm done here.
Looks like I haven't been banned yet..
Anyway.gen4acclude, read all the criticism in this thread. There's a lot of experience in this thread.
The exact same logic for the ef applies to the cb7 as they both use a radius rod to keep the front knuckle from flying through the fender. You also have to keep in mind that the cb7 weighs more so the flaws in this design would be amplified.
I'm done here.
05-13-2007, 12:27 PM
#106
0.0 BAR
Join Date: Feb 2005
Posts: 0
Re: HMT= Home Made Traction bars (CSaddict style)Now with test drive results!
best way to stop wheel hop is to sell your honda and buy a car with a decent front end :P
05-14-2007, 07:27 PM
#107
3.0 BAR
Join Date: Jan 2003
Posts: 4,401
Re: HMT= Home Made Traction bars (CSaddict style)Now with test drive results!
Originally Posted by 2point2
The exact same logic for the ef applies to the cb7 as they both use a radius rod to keep the front knuckle from flying through the fender. You also have to keep in mind that the cb7 weighs more so the flaws in this design would be amplified.
i have a cb7 and theres no way i would rock that. es bushings and a good alignment help a lot in addition to a good shock/spring/ motor mount combo. on an eg its ok, but no effing way is that bar worth risking your life.
05-14-2007, 09:56 PM
#108
3.0 BAR
Join Date: Jun 2005
Posts: 1,623
Re: HMT= Home Made Traction bars (CSaddict style)Now with test drive results!
so explicitspeeds bar system which is very simalar is unsafe bigdaddyvtec runs a set and im yet to heard bad from him
05-14-2007, 10:00 PM
#109
3.0 BAR
Join Date: Jan 2003
Posts: 4,401
Re: HMT= Home Made Traction bars (CSaddict style)Now with test drive results!
Originally Posted by gen4acclude
so explicitspeeds bar system which is very simalar is unsafe bigdaddyvtec runs a set and im yet to heard bad from him
05-14-2007, 10:20 PM
#110
3.0 BAR
Join Date: Jun 2005
Posts: 1,623
Re: HMT= Home Made Traction bars (CSaddict style)Now with test drive results!
so what part of the design that csaddict have that was cheapo the metel type or the design itself, which is very similar, if its the metal what would you use
