Fabrication Everything From JBwelded/Fluxcored downpipes to Equal length SS Manifolds.

Fabricating your own exaust AFTER the down pipe...

Thread Tools
 
Search this Thread
 
Old 02-18-2007, 12:06 AM
  #21  
3.0 BAR
 
Minor Threat's Avatar
 
Join Date: Mar 2004
Posts: 1,729
Default Re: Fabricating your own exaust AFTER the down pipe...

Originally Posted by bounce
just to show you how high you can get without car lift
now i got an engine lift to do my swaps
front page material
Minor Threat is offline  
Old 02-18-2007, 01:31 AM
  #22  
0.0 BAR
 
HondaTuner's Avatar
 
Join Date: Dec 2003
Posts: 0
Default Re: Fabricating your own exaust AFTER the down pipe...

I use the jackstands, keep the jack under, and throw some blocks/wood under the car to be extra careful.
HondaTuner is offline  
Old 02-18-2007, 01:51 AM
  #23  
1.0 BAR
 
AssHat!!'s Avatar
 
Join Date: Nov 2006
Posts: 336
Default Re: Fabricating your own exaust AFTER the down pipe...

I never used jack stand's, untill i was working under the car. climbed out from under it went in the house to get something to drink. when i came back out the jack had turned over some how and came out from under the car and the car was sitting on the ground and i had both front wheel's off. So yea that would have sucked.
AssHat!! is offline  
Old 02-18-2007, 09:46 AM
  #24  
0.5 BAR
 
o0Quicksilver0o's Avatar
 
Join Date: Jan 2005
Posts: 158
Default Re: Fabricating your own exaust AFTER the down pipe...

Originally Posted by AssHat!!
I never used jack stand's, untill i was working under the car. climbed out from under it went in the house to get something to drink. when i came back out the jack had turned over some how and came out from under the car and the car was sitting on the ground and i had both front wheel's off. So yea that would have sucked.
o0Quicksilver0o is offline  
Old 02-18-2007, 09:49 AM
  #25  
0.0 BAR
 
Smith-02's Avatar
 
Join Date: Apr 2006
Posts: 0
Default Re: Fabricating your own exaust AFTER the down pipe...

for most things i dont need jackstands. only needed one to flex my worn out stock suspension to drop my oil pan
Smith-02 is offline  
Old 02-18-2007, 12:34 PM
  #26  
3.0 BAR
 
Slo_crx1's Avatar
 
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Default Re: Fabricating your own exaust AFTER the down pipe...

I don't need to jack my car up at all to do exhaust work. I have a 6 foot deep pit in my garage...pull the car up over the pit, walk down the stairs into the concrete hole, and proceed to tack weld the pipes together.
Slo_crx1 is offline  
Old 02-20-2007, 09:05 PM
  #27  
1.0 BAR
 
dcg9381's Avatar
 
Join Date: Sep 2006
Posts: 326
Default Re: Fabricating your own exaust AFTER the down pipe...

Garage pit eh?

I tack weld it with the crap on the car. Pull it off and weld it properly off the car:

dcg9381 is offline  
Old 02-20-2007, 10:30 PM
  #28  
1.5 BAR
 
Hellbert's Avatar
 
Join Date: Jul 2005
Posts: 724
Default Re: Fabricating your own exaust AFTER the down pipe...

Originally Posted by slo_crx1
I don't need to jack my car up at all to do exhaust work. I have a 6 foot deep pit in my garage...pull the car up over the pit, walk down the stairs into the concrete hole, and proceed to tack weld the pipes together.
im scared to go in our pit with a welder...we spray too much brake clean and there is entirely too much oil on the floor. id never make it out alive...
Hellbert is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nick6444
Forced Induction
1
02-13-2009 09:18 PM
boostdcrx91
Wanted
2
05-01-2006 07:40 PM
Vtec Shmave2
General Discussion
6
07-12-2004 11:17 AM
junk240sx
Turbo Parts For Sale
12
02-18-2004 07:15 PM
96turboracer
General Discussion
10
01-24-2004 08:46 AM



Quick Reply: Fabricating your own exaust AFTER the down pipe...



All times are GMT -5. The time now is 03:15 AM.