Re:Uberteg Software
why won't 1.62 open for me? i went to gimpy's site and DL'ed it from the directory listing, it says i'm missing a .dll file. the old uber worked fine though.
|
Re:Uberteg Software
you need to download all the scripts from the script page
www.angelfire.com/indie/bigwig/uberdata.zip that has all the roms plus some of mine and all that good ---- |
Re:Uberteg Software
whenever a new ver of uberdata comes out, the only thing that changes (typically) is the exe and MAYBE the autoexec.txt. So just copy those on top of your old ones and voila, you've upgraded.
|
Re:Uberteg Software
This software is PFG "pure f--cking genius"
I cant wait to run this new version. Thanks bigwig ;D |
Re:Uberdata Support - Current Version: 1.64
FYI: There is now a semi-official Uberdata Support Forum. It can be found at:
http://www.ecimulti.org/uberdata/forum Thanks! |
Re:Uberdata Support (OBD1) - Current Version: 1.65
|
Re:Uberdata Support (OBD1) - Current Version: 1.65
This is the latest and greatest version of 1.65 :)
|
Re:Uberdata Support (OBD1) - Current Version: 1.65
after reading this thread i think im gonna give Uberdata a try...i just have a few questions.
1. is this free? someone said it was $200, but then i downloaded it for nothing. or is the chip burner $200?? 2. Im getting an H23 prelude engine to put in my 92 accord EX. I guess im gonna use the P06 ECU. will this ECU power the H23 correctly? 3. if i can use the p06, what would I have to change, if anything, on the p06 rom file that is packaged with Uberdata? |
Re:Uberdata Support (OBD1) - Current Version: 1.65
Originally Posted by Accord R33
1. is this free? someone said it was $200, but then i downloaded it for nothing. or is the chip burner $200??
Yes. It's free. Chip burners range in price from $60-$150 2. Im getting an H23 prelude engine to put in my 92 accord EX. I guess im gonna use the P06 ECU. will this ECU power the H23 correctly? I don't know my H motors, is that VTEC? If it is, I wouldn't use a P06, but rather a P28. If it isn't VTEC, then it'll run it just fine. Put H23 stock maps on there, and begin tuning. 3. if i can use the p06, what would I have to change, if anything, on the p06 rom file that is packaged with Uberdata? The fuel and timing maps, rev limits, things like that. Give them H23 characteristics, and it should run fine. You don't use the P06 ROM file that is packaged with Uberdata. Use the StockLS ROM, and put H23 maps on it, and run it on your P06 hardware. :D Hehe, Welcome to the world of OBD1... lots of code can run on lots of hardware. It's pretty much all the same stuff. Check out the Uberdata website/forums for more detailed in depth information. |
Re:Uberdata Support (OBD1) - Current Version: 1.65
thanks for the info. The H23 is the non-VTEC prelude engine. which is why i want to use that instead of the VTEC H22. (plus its a lot cheaper).
Im gonna have to figure out what numbers i need to input into the software...i have NO CLUE what any of that is...mabye i can find someone who has already done it... |
All times are GMT -5. The time now is 10:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands