Uberdata Support (OBD1) - Current Version: 1.7 w/ Datalogging
 

Hi Folks, there is a guy on Honda-tech who is selling a software (hi username is uberteg). Please take a look at this http://honda-tech.com/zerothread?id=435072

I was wondering if anyone had tried it... the complete kit at 200$ including the tuning software.... How is it, compared to Hondata?... How do you logdata with that thing.. ?


Thanks.

Re:Uberteg Software
 

Try searching this forum for Uberteg and/or Uberchips. This ground has been covered pretty thoroughly.

Re:Uberteg Software
 

HI Joseph... I like the Uberchips, but seems like no one is there to sell it... Emailed uberteg by itself as well as Stupidfast but no one ever answered... are they still doing business, are they going to give support after sale. I would like to buy from them giving them some $$ support, but I am also afraid to get nothing back from it... You probably know them better than me and is in a good positions to give me advise, if you will...

Thanks

Re:Uberteg Software
 

Well, what is there is pretty solid, and I'll offer you all the tuning advice you need on it.

Have you tried PseudoSilvia on HT yet? It is my understanding he's handling most of Uberteg's sales for him now... Blake wasn't getting any time spent coding, or as is the case right now building his new engine.

Re:Uberteg Software
 

BTW joseph, I can hardly find any info on uberteg software on HT or HMT... I really really really want to know what this software can do and cannot do... would it work on my GSR quipped with p72 ECU... what it cannot do etc... sheesss... I would love to learn more, just asking to understand the features... Tried the search, but barely found useful infos , except for some unsueful comments...

Thanks
BO

Re:Uberteg Software
 

It's based on P72 and P75 code, which are 99.9% the same. That code just happens to run on other OBD1 VTEC and non-VTEC Civic/Integra ECUs since it's all one big happy hardware family.

Right now, it supports boost off the stock MAP sensor, fully adjustable fuel and ignition, custom idle, custom revlimit, fuel rescale for any size injectors you can drum up, and it also implements a second revlimit when going below a certain vehicle speed... say, 3000 rpms at 6 mph or less; this helps traction on launch like an MSD two step box. You can save tunes, import tunes, and chip as many ECUs as you like for NA or boost - UNLIKE Hondata who suckers you into only being able to use one ECU.

Any other questions?

Re:Uberteg Software
 

Launch control rocks :o

Re:Uberteg Software
 

Yes, one more question, does it allow me to correct the duty cycle on injectors as well as map the fuel and retard timing by amount of boost (until how much ??). Also , can I datalog infos froms my ecu via the CN ports and the Uberteg software ?


Thanks

Re:Uberteg Software
 

i still want to know where i can get it ;D

Re:Uberteg Software
 

You said it works with the factory map sensor what about a 3 bar GM sensor?

Re:Uberteg Software
 

Here's more info on the uberteg chip, which I plan on getting once I finish my b18b into my 2000 civic. http://honda-tech.com/zerothread?id=435072


Here's where u can buy it ($200)
http://www.stupidfast.com

Re:Uberteg Software
 

what language was the program written in?

Re:Uberteg Software
 

I suggest you learn more about the person before buying it..He hasent contacted most of the people on h-t and they havent recieved most of their stuff..Some got chips that didnt work..

Re:Uberteg Software
 

Uberteg is a busy guy. In addition to being in college full time, he has a g2teg that he keeps blowing up and needing to fix. :)

He may be a little bit difficult to deal with, but he is an honest kid and a ------- genius to boot. Honda-tech is one of the least-common-denominator forums there is. In my experience, Uberteg has little-no patience for newbies and "stupid" questions. I'm not surprised that the whiners are whining.

The Uberchip was based initially on the honda P75 ECU. The tables were enlarged to allow room for boost, routines that read the MAP sensor were rewritten, table scalars altered, tweaking, tweaking, tweaking,... All the work was done in Oki 66K assembly (by hand, without the help of an assembler I might add) and the ERM program was written in C/C++ WITHOUT MFC libraries. The boost code was then ported to the P72 (since the code is al but identical to the P75) and then support for the P28 was added by disabling the knock board checking in the P72 code.

If Uberteg is having trouble delivering, trust that it is logistical issues, not any problem with the chip or code. The kid can code like few I've ever seen.

Re:Uberteg Software
 

I talked to Blake today; he's camping a friend's house until his car is running again. His friend has a garage, and they are building + installing his new engine.

PseudoSilvia, formerly known as Hatchblack, on Honda-Tech is handling all sales of his chips and/or the boost editor. Contact him.

This thread is getting a sticky because I have a hmt inbox, email inbox, and AIM going crazy over the subject. Everything you need to know is here, please give me 5 minutes of peace and quiet ;).

Re:Uberteg Software
 

that guys attitude ------- stinks.

:P

Re:Uberteg Software
 

Yup. I'm tolerant of Blake because I used to be just like him, when I was a 19 y/old snot nosed brat with a shitty attitude. He has failed to treat other people in a mature, adultlike fashion.

Re:Uberteg Software
 

Hello,
Im new here... anyway, Joseph could you clarify a few thing for me regarding the uberteg software?
The following is based on my research and findings/ and lack of
1) My understanding is that with Ubertegs set up you dont need to run a fpr or upgraded fuel pump. Am I correct?

2) If I purchase the bantronix software I will be able to tune it on the spot without removing the chip because it is a eeprom emulator?

3) Is this program similar to the Hondata system which is set up for 80% of daily driving (thats what I will be using it for)

4) Do you (Joseph) have other maps and numbers we can use to tune them ourselves??

5) Do you know of any NOR CAL tuners??

Thanks in advance for any/all help you will provide!! Props to HMT!!! ;D

Re:Uberteg Software
 

I'm not Joesph, but...

Re:Uberteg Software
 

Thanks TurboEF9 for all the help! Joseph if you could fill in the blanks? Thanks in advance!
BTW TurboEF9 the same on H-T??

Re:Uberteg Software
 

TurboED9 pretty much covered it all.

However, I would like to clarify on the Xtronic's ROMulator... it's supposed to be a decent unit, I just loathe their glitchy Pocket Programmer chip burner. They foisted that thing off on the market for three years before they got around to fixing it. You won't find a better deal on a chip burner than Batronix... as far as a ROMulator or EPROM emulator goes, Xtronic's product may or may not be the best bang for the buck - I have no firsthand experience with it.

Re:Uberteg Software
 

hey guys when using the ls pr4 does the vtec part can be added???........since the pr4 is non vtec i'm guessing it can be added ??? ;D

Re:Uberteg Software
 

Ya.. that's me..


Joesph,
Heh, most people don't normally catch the ED/EF part. Oh well.. maybe one day when I'm overpaid and underworked I'll own an EF.. ;D

Re:Uberteg Software
 

ahhhhhhh just give me a damn carb!!!!! lol 900 lbs of boostt and theres no computer to confuze.. impossible to get a good fuel setup though. i'm so confuzed. is this and easy product for newbies to pick up ang get basic results out of?

i wanted to run a S-afc, i knew that but didnt know what else i'd neeed. is this an a S-afc sufficient? mechanically my motor will be up to par

Re:Uberteg Software
 

You need bigger injectors with it.

Re:Uberteg Software
 

no i was refering to electronics changes... just uberteg software and a S-afc is all i'd need to modify the electronics?

Re:Uberteg Software
 

if your getting uberteg's software, you don't need an afc, however if you are getting just the chip, you may want an afc to fine tune, but it would be cheaper just to get uberteg's software and a chip burner, so no, all you need is uberteg, i'll sell you an afc for cheap though if you really want one ;)

Re:Uberteg Software
 

Hey I finally got a uberteg chipped ecu and running some 440s.. Do I still need to get a missing link or a FMU??

Re:Uberteg Software
 

nope

Re:Uberteg Software
 

the email address on HT doesnt accept emails. could someone please let me know ueberteg's email address?

Re:Uberteg Software
 

just contact him on AIM. I believe his screenname is blawar.

Re:Uberteg Software
 

anyone want to share their 440 maps for a b18b with a t3/t4e? stock motor..

Re:Uberteg Software
 

Dreadfully sorry, should have updated this a while back:

http://www.pgmfi.org/phorum/read.php?f=13&i=3104&t=3104

Re:Uberteg Software
 

alright, well i have my turbo, mainifold, 440's, downpipe, all the other piping, wastegate, and intercooler. Now it is time for the managment, and i am looking into getting this. I would just like to know any other parts i would need if i plan on running about 6psi on a daily driver.

do i just need the software? what about a burner? anything else?

and how would i tune my own car with this

Re:Uberteg Software
 

major update available.

http://honda-tech.com/zerothread?id=626171

Re:Uberteg Software
 

Thanks Blundar. very helpful. ;)

Re:Uberteg Software
 

Does uberteg software support p07 ecu? Btw vx vtec-e ecu :D

Re:Uberteg Software
 

P07 is wierd. Lazy/intermittant VTEC engagement, etc. They have a second processor to control DSP for the WB02, and (my theory) when you chip with non-P07 code you remove all the programming that tells the main processor how to communicate with the secondary one which causes all sorts of wierd actions.

I've never bothered chipping one, to be truthful. From the types of complaints I hear regarding them, I'm half certain you could run regular non-VTEC programs, but take that with a grain of salt.

Re:Uberteg Software
 

i am in the process of dumping the p07 rom as we speek (type or whatever)
once i get a few issues i am having worked out, i should have it posted on pgmfi with in the next few days.

i think people may start using the p07 for more than just spare parts.

Re:Uberteg Software
 

The H-T thread is a little old. Did he ever come up with a VTEC program?