Go Back  HomemadeTurbo - DIY Turbo Forum > Homemadeturbo > Engine Management
Uberdata Support (OBD1) - Current Version: 1.7 w/ Datalogging >

Uberdata Support (OBD1) - Current Version: 1.7 w/ Datalogging

Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Uberdata Support (OBD1) - Current Version: 1.7 w/ Datalogging

Old 05-15-2003, 12:07 AM
  #1  
0.5 BAR
Thread Starter
 
Join Date: Jan 2003
Posts: 86
Default Uberdata Support (OBD1) - Current Version: 1.7 w/ Datalogging

Hi Folks, there is a guy on Honda-tech who is selling a software (hi username is uberteg). Please take a look at this http://honda-tech.com/zerothread?id=435072

I was wondering if anyone had tried it... the complete kit at 200$ including the tuning software.... How is it, compared to Hondata?... How do you logdata with that thing.. ?


Thanks.
Mz3bo is offline  
Old 05-15-2003, 12:10 AM
  #2  
0.0 BAR
 
Join Date: Feb 2003
Posts: 0
Default Re:Uberteg Software

Try searching this forum for Uberteg and/or Uberchips. This ground has been covered pretty thoroughly.
Tom-Guy is offline  
Old 05-15-2003, 12:14 AM
  #3  
0.5 BAR
Thread Starter
 
Join Date: Jan 2003
Posts: 86
Default Re:Uberteg Software

HI Joseph... I like the Uberchips, but seems like no one is there to sell it... Emailed uberteg by itself as well as Stupidfast but no one ever answered... are they still doing business, are they going to give support after sale. I would like to buy from them giving them some $$ support, but I am also afraid to get nothing back from it... You probably know them better than me and is in a good positions to give me advise, if you will...

Thanks
Mz3bo is offline  
Old 05-15-2003, 12:17 AM
  #4  
0.0 BAR
 
Join Date: Feb 2003
Posts: 0
Default Re:Uberteg Software

Well, what is there is pretty solid, and I'll offer you all the tuning advice you need on it.

Have you tried PseudoSilvia on HT yet? It is my understanding he's handling most of Uberteg's sales for him now... Blake wasn't getting any time spent coding, or as is the case right now building his new engine.
Tom-Guy is offline  
Old 05-15-2003, 12:20 AM
  #5  
0.5 BAR
Thread Starter
 
Join Date: Jan 2003
Posts: 86
Default Re:Uberteg Software

BTW joseph, I can hardly find any info on uberteg software on HT or HMT... I really really really want to know what this software can do and cannot do... would it work on my GSR quipped with p72 ECU... what it cannot do etc... sheesss... I would love to learn more, just asking to understand the features... Tried the search, but barely found useful infos , except for some unsueful comments...

Thanks
BO
Mz3bo is offline  
Old 05-15-2003, 12:26 AM
  #6  
0.0 BAR
 
Join Date: Feb 2003
Posts: 0
Default Re:Uberteg Software

It's based on P72 and P75 code, which are 99.9% the same. That code just happens to run on other OBD1 VTEC and non-VTEC Civic/Integra ECUs since it's all one big happy hardware family.

Right now, it supports boost off the stock MAP sensor, fully adjustable fuel and ignition, custom idle, custom revlimit, fuel rescale for any size injectors you can drum up, and it also implements a second revlimit when going below a certain vehicle speed... say, 3000 rpms at 6 mph or less; this helps traction on launch like an MSD two step box. You can save tunes, import tunes, and chip as many ECUs as you like for NA or boost - UNLIKE Hondata who suckers you into only being able to use one ECU.

Any other questions?
Tom-Guy is offline  
Old 05-15-2003, 01:34 AM
  #7  
1.5 BAR
 
Join Date: Dec 2002
Location: Nashville
Posts: 807
Default Re:Uberteg Software

Launch control rocks
MR_DR_PEP is offline  
Old 05-15-2003, 07:57 AM
  #8  
0.5 BAR
Thread Starter
 
Join Date: Jan 2003
Posts: 86
Default Re:Uberteg Software

Yes, one more question, does it allow me to correct the duty cycle on injectors as well as map the fuel and retard timing by amount of boost (until how much ??). Also , can I datalog infos froms my ecu via the CN ports and the Uberteg software ?


Thanks
Mz3bo is offline  
Old 05-15-2003, 07:57 AM
  #9  
3.0 BAR
 
Join Date: Apr 2003
Posts: 11,059
Default Re:Uberteg Software

i still want to know where i can get it
projekteg is offline  
Old 05-16-2003, 10:16 PM
  #10  
1.5 BAR
 
Join Date: Dec 2002
Posts: 1,495
Default Re:Uberteg Software

You said it works with the factory map sensor what about a 3 bar GM sensor?
Chacko is offline  

Thread Tools
Search this Thread
Quick Reply: Uberdata Support (OBD1) - Current Version: 1.7 w/ Datalogging


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.