Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

thanks..... :)

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

What is up with the vtec thing on Turboedit??

There is a person in my state, fabrik8, he is also on pgmfi.org, and i want to know if his vtec activation on the PM6 will work with turboedit??

The vtec propertie feature in turboedit, does that just change the fuel maps?? or what is that about??

thanks for helping me

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Well, the hardware changes are just a mimic of the PS9's auto lock up solenoid output line, which we're using for VTEC activation.

If fabrik8 can do those hardware changes for you, then yes.

The code is what runs it, the output line just needs to be there.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

So, im still trying to talk to Fabrik, so if he can do it, ill get him to do it because im too much of a newbie. I just definetly want it to work with turboedit!!!! So in order for it to work for Turboedit is has to be through a autolock up from a ps9??

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

either a PS9 or a PM6 with the auto hardware in it.

there is a specific bin that you would need, but worry about the hardware first.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Well, that bin will be _the_ primary bin once it's verified that it works.

Not enough beta testers with complete setups.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Ok, well im waiting on a Zif from the group buy onyx did, and then maybe i can help you test it??? Let me know, im going to get him to do it, and then change the chip!! hahah Turboedit is beast.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

any support for larger injectors? I have some 780s.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

You would have to manually scale your maps for them.

The latency at idle would be enormous and I wouldn't know if you could get an OBD0 ECU to idle them. Smallest pulse duration is 1.08ms...

..you might ask Dave L (leed) or Dave B (blundar), they would know more about it I bet.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

I was trying to find the right max232 to buy for datalogging on a pm6, but i couldnt figure out which one I needed.

A232DBK
Max232 RS232 Serial I/O Kit
$13.00
$3.00
$16.00


A232DBA
Max232 RS232 Serial I/O Kit Assembled
$18.00
$4.00
$22.00


A232DBH
Max232 RS232 I/O Assembled with hood kit
$20.00
$4.00
$24.00


which one is it?