Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

ok so if the dual map, run on both boost and vaccum, then you could run either or? So the computer when it senses the vaccum to boost crossover, then it will read off the positive side of the ignition and fuel map correct??

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Yes.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

thats so sweet!! ;D Turboedit i know i want now, I can write me own chips... this is going to work well I think, and hope, I want to atleast break 170-180...with turbo i think i'm going to beable to or atleast come close! but first I need to get my ecu chipped

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.10
 

Good question...anyone?
Also, there is a VTEC mod in the program, is there a way to hook this up to the VTEC controller?

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

what do I exactly need for datalogging?

parts list?

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

Check out www.ecucontrol.com

He has FAQ and writeups with part #'s

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

will I be able to control my 750cc injectors with TE?

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

up to 450cc with their auto math, I think you can control them by taking the car to a dyno and creating some new fuel maps.

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

thanks....and why is my fuel and ignition table window cutoff at 6300rpm?
here's the link
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

Re:TurboEDIT Support (OBD0) - Current Verison: 2.0.11
 

because your windows theme is ------- it up; swtich to classic view and it should work; the other cells are there just hiding