Turbo edit basemap: spark plugs black, 10:1 to 11:1 afr on wideband. can't idle.

Reply Subscribe

Thread Tools

Search this Thread

Aug 2, 2006 | 03:08 PM

#21

Minor Threat

3.0 BAR

Joined: Mar 2004

Posts: 1,729

Re: Turbo edit basemap: spark plugs black, 10:1 to 11:1 afr on wideband. can't i

Check your rotor/cap? Mine was flipped 180 degrees, wouldn't start but I still got spark.

Aug 2, 2006 | 03:53 PM

#22

b16crex

Thread Starter

0.5 BAR

Joined: Nov 2004

Posts: 189

Re: Turbo edit basemap: spark plugs black, 10:1 to 11:1 afr on wideband. can't idle.

how do i check and see if it's set right... and how do i make it correct?

Aug 2, 2006 | 04:56 PM

#23

Minor Threat

3.0 BAR

Joined: Mar 2004

Posts: 1,729

Re: Turbo edit basemap: spark plugs black, 10:1 to 11:1 afr on wideband. can't i

Get your #1 cyl at TDC, make sure your crankpully + cam gears line up. Easiest way I find is to take the plug out and stick something long down into the cyl and crank the engine around by hand. When whatever you stick in the cyl is the highest out, that's TDC.

Then, pull the cap off your distributor and make sure the rotor is pointing towards the right plug wire.

Aug 4, 2006 | 01:49 PM

#24

b16crex

Thread Starter

0.5 BAR

Joined: Nov 2004

Posts: 189

Re: Turbo edit basemap: spark plugs black, 10:1 to 11:1 afr on wideband. can't idle.

pointing towards the right plug wire? which plug wire? am i looking at where the rotor is pointing based off of the cap like #1 plug spot for the cap... eh?