Supply a basemap or someone else's basemap for an obd1 gsr turbo?
05-19-2005, 10:26 PM
#1
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
Supply a basemap or someone else's basemap for an obd1 gsr turbo?
I got a guy that needs a basemap for his GS-R setup.
450cc
14b turbo (i know....I KNOW)
I was gonna build him a Crome base and tune him a bit but he has a sense of urgency to just get it running and driving. I told him if I could track down a useable bin tonite I would. I found an uber map titled cole is a hardcore mother....etc on the xeno bin site, anyone have anything else?
Jason
450cc
14b turbo (i know....I KNOW)
I was gonna build him a Crome base and tune him a bit but he has a sense of urgency to just get it running and driving. I told him if I could track down a useable bin tonite I would. I found an uber map titled cole is a hardcore mother....etc on the xeno bin site, anyone have anything else?
Jason
05-19-2005, 11:12 PM
#3
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
Re: Supply a basemap or someone else's basemap for an obd1 gsr turbo?
Originally Posted by Donald125
can`t you just creat one with the stock GSR bin?
05-20-2005, 08:27 AM
#6
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
Re: Supply a basemap or someone else's basemap for an obd1 gsr turbo?
Originally Posted by TurboEF9
...what about using UD? 
1.66 kept tossing all sorts of weird values all skewed off so that the fuel curves looked like a spiderweb in 2d, and 1.7 kept giving me assembly errors when trying to open a stock map....UD gets a big thumbs down.
I ended up just building a Crome base for it.
And beside that, you're all missing the point. I asked if anyone had anything I could just throw at him on short notice...time being the factor there.
05-21-2005, 01:23 AM
#9
1.0 BAR
Join Date: Apr 2003
Posts: 467
Re: Supply a basemap or someone else's basemap for an obd1 gsr turbo?
Originally Posted by ****
Originally Posted by TurboEF9
...what about using UD?
1.66 kept tossing all sorts of weird values all skewed off so that the fuel curves looked like a spiderweb in 2d, and 1.7 kept giving me assembly errors when trying to open a stock map....UD gets a big thumbs down.
I ended up just building a Crome base for it.
And beside that, you're all missing the point. I asked if anyone had anything I could just throw at him on short notice...time being the factor there.
05-21-2005, 02:11 AM
#10
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
Re: Supply a basemap or someone else's basemap for an obd1 gsr turbo?
Originally Posted by sohc_mshue
Use uberdata 1.70. The assembley error you are getting is because you don't have the .bin in the same directory as uberdata. Either way that error doesn't hurt anything. I save files in other places and get that error all the time, but my car has always ran fine. Just build him a p72 basemap in uber. Its shouldn't take you more than 1 minute. This should be plenty conservative enough to run a 14b on a b18c.
bin file was in the same dir as uber.
already built a map in crome.
