Im rebuilding my dohc zc. Can i use mains and rod bearings from any d16

 

Thinks so...look for the bearing code

 

Yes, but...

Honda motors have numbers and letters stamped on the block,crank,rods and main caps. The bearings you will use are color coded. You find the markings on the rod and then the marks on that rod journal on the crank. Then you check the chart (from a Helms or at the dealer) to see what bearing to use. All the bearings on the crank may not be the same. My ZC motor had 3 different bearings for rod bearings.By doing it this way Honda can hold much closer specs on their motors.

 

sweet, i got all my bearing colors down too. thanks