im thinking of doing this swap, for many reasons (ease of tuning, datalogging, etc)



where the ---- do those extra wires go to? i have been told by several people that i would just have to throw in a OBD1 dizzy (repinned), P28 w/harness...none have said anything about a wiring harness that needs to be wired in?!?!?


also... i think it was Josh that was telling me that i could just get a cheap *** OBD1 DX dizzy and swap the ---- from inside to my dizzy, and i have myself a OBD1 dizzy for cheap!...is this right? and what parts am i swapping in/out?

 

come to think about it i bet those wires are for: O2 sensor (heater and ----), knock sensor, VTEC oil pressure...? but those can be turned off in Uberdata right?

 

Ya those should be 4 wire o2,knock,vtec,vtec oil,dist wiring. But since uberdta can diable 02 you dont need to run but the vtec wires,dist. You will need to get an obd-1 dist though.

 

did you buy that harness? if you did you're a big loser unless you got it cheap because I know you're junkyard crazy and you could get all the parts you need to make that ---- yourself.

 

yeah but im lazy and i really dont like to do wiring of any kind... i will find the best deal possible of course... i think that Dave has made some in the past...

 

hey dustin let me no how it goes im really thinking about doing this also.. keep me posted

 

I'll be sure to do a full write up with bling blingin pictures and possibly a video, because I'm crazy like that.

 

https://www.homemadeturbo.com/forum/...threadid=26505...

not sure if i even want to bother...