OBD0 to OBD1 swap?
 

im thinking of doing this swap, for many reasons (ease of tuning, datalogging, etc)

https://i20.ebayimg.com/03/i/02/4b/ec/b2_1.JPG

where the ---- do those extra wires go to? i have been told by several people that i would just have to throw in a OBD1 dizzy (repinned), P28 w/harness...none have said anything about a wiring harness that needs to be wired in?!?!?


also... i think it was Josh that was telling me that i could just get a cheap ass OBD1 DX dizzy and swap the ---- from inside to my dizzy, and i have myself a OBD1 dizzy for cheap!...is this right? and what parts am i swapping in/out?

Re:OBD0 to OBD1 swap?
 

come to think about it i bet those wires are for: O2 sensor (heater and ----), knock sensor, VTEC oil pressure...? but those can be turned off in Uberdata right?

Re:OBD0 to OBD1 swap?
 

Ya those should be 4 wire o2,knock,vtec,vtec oil,dist wiring. But since uberdta can diable 02 you dont need to run but the vtec wires,dist. You will need to get an obd-1 dist though.

Re:OBD0 to OBD1 swap?
 

did you buy that harness? if you did you're a big loser unless you got it cheap because I know you're junkyard crazy and you could get all the parts you need to make that ---- yourself.

Re:OBD0 to OBD1 swap?
 

yeah but im lazy and i really dont like to do wiring of any kind... i will find the best deal possible of course... i think that Dave has made some in the past...

Re:OBD0 to OBD1 swap?
 

hey dustin let me no how it goes im really thinking about doing this also.. keep me posted

Re:OBD0 to OBD1 swap?
 

I'll be sure to do a full write up with bling blingin pictures and possibly a video, because I'm crazy like that.

Re:OBD0 to OBD1 swap?
 

https://www.homemadeturbo.com/forum/...threadid=26505...

not sure if i even want to bother...