Re: makein the bitch run, main relay symptoms but its not... help! info on page
 

at least you have some relief now.
almost there. good luck.

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

TIME ING!

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

haha had the injectors hooked up wrong, think i flooded it now but i think she'll fire tomorrow ;D

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

---- tommorow, jump the starter with wot and key off to clear the cyl's then fire the bitch up

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

dead battery, and no charger means i had to wait till today ;D goin up now to try and fire it up

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

got her to run for 5 seconds, discovered an oil leak so waitin for some gasket maker to dry then the bitch gets broken in :6

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

VIDEO

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

would if i could get the bitch started >:( it'll start and run for about 15 seconds with the injectors unplugged, floods with them plugged in

anyone with an EF have a Z6 swapped? if so i need to know how your injector wires are run, i think mine are wrong but the manual says there right ???

my injectors are wired like so

red brown #1

red red #2

red blue #3

red yellow #4

the manual says thats right but why would i be flooding if it is...? ???

Re: need some wireing help, info on page two
 

she moved 5 feet under her own power today! i have a bitch of an oil leak so i stuck some jb weld to it :1 it'll be cured tonight so hopefully shes ok to drive

if i have to force it to idle, and it runs rough under 1K rpms, but runs smoothly above, would it be ok to drive it like that? i gotta head out to a job tomorrow and need it :-\

Re: puttin the bitch back together, need ring end gap info asap!
 

btw, from the 5 feet i moved it, it engaged pretty smoothly and didnt stumble at all, maybe its just from the LW flywheel that it engaged so smoothly ??? i dunno.. we'll see once i take it for a spin tonight