Re: makein the bitch run, main relay symptoms but its not... help! info on page
 

ecu fuse in the engine bay?

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

its good and in place, first thing i checked.. also checked the fuse under the dash and its good

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

sounds like 1 little ground thats no hookrd up that will take u an hour to find and have looked at 10 times already,
wire by wire check the whole harness

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

i've checked all my grounds, thermo ground wasnt hooked up so i hooked it back up, still the same problem, also a plug on the harness fell out of place, guess i didnt hook it up right.. but still the same problem..

anyone know all the grounds offhand in an EF hatch with a Z6 swap? i'm going to look through the manuals i have to see if im missing anything.. thing that piss's me off is i know it must have been working at one time.. i had 20psi of fuel pressure at the rail earlier and now cant get it back

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

got another ecu to try?

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

the ecu should be good, i got it from xenocron

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

batt got 12V?
after a long install you could overlook it

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

testing with it jumped from another car

im completely stumped ???

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

look for more grounds, is the neg cable put back on the battery? lol.

check the alt solenoid fuse in the dash fuse box too.

Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
 

i've got the problem fixed, the thermo ground wasnt good and the fuse under the dash aparently was either bad or the wrong amp size

i've got fuel, spark, etc, now my timeing is just off a bit.. i can feel it want to start but it's not quite there