need some wireing help, info on page two
07-03-2006, 08:35 PM
#51
1.5 BAR
Join Date: Mar 2006
Posts: 835
Re: puttin the bitch back together, need ring end gap info asap!
Originally Posted by Anubis_4_99
eh it'll be fine i think, if the unsprung is too much i'll change the clutch out in a couple months
it cant be much worse then my 4 puck was and i DD that 50 miles to and from work
i didnt realize it was an unsprung clutch untill it came, lol, but its my own mistake so i'll deal till i can fix it
it cant be much worse then my 4 puck was and i DD that 50 miles to and from work
i didnt realize it was an unsprung clutch untill it came, lol, but its my own mistake so i'll deal till i can fix it
07-03-2006, 09:54 PM
#52
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: puttin the bitch back together, need ring end gap info asap!
Originally Posted by z1guy
have fun, seriously, be prepared to hate driving.
it was a mistake, i didnt check if it was sprung or not, so i'll deal with it till i can get a sprung
07-03-2006, 09:56 PM
#53
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: puttin the bitch back together, need ring end gap info asap!
Originally Posted by Zeniceguycrx
man one bolt will brake your starter housing iv done it
what im worried about now is my rad fitting :1 i've been useing a full size teg rad and just realized i may not have enough room now with my 50/63 and my half size has a hole in it that i never got fixed
07-04-2006, 12:06 AM
#56
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: puttin the bitch back together, need ring end gap info asap!
hey guys i need some more help
does anyone know offhand what goes on the back of the little black box that plugs into the back of the motor under the TB? i forgot what goes there and im really hopeing its not a big deal if i dont hook it up because i have the head tourqed down already :1
does anyone know offhand what goes on the back of the little black box that plugs into the back of the motor under the TB? i forgot what goes there and im really hopeing its not a big deal if i dont hook it up because i have the head tourqed down already :1
07-06-2006, 05:47 PM
#60
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: puttin the bitch back together, need ring end gap info asap!
ok im either haveing some ground or power issue's
i have symptoms like a bad main relay but i know thats not the problem, i just replaced mine with a brand new one from honda
my injectors arent fireing, ecu isnt seeing power, and fuel pump isnt primeing
earlier i had a check engine light and now i dont get one at all.. i can make the main relay buzz by moveing a fuse in the fuse box but thats all the action i can get out of it
anyone know anything that could cause symptoms like this other then a main relay?
i have symptoms like a bad main relay but i know thats not the problem, i just replaced mine with a brand new one from honda
my injectors arent fireing, ecu isnt seeing power, and fuel pump isnt primeing
earlier i had a check engine light and now i dont get one at all.. i can make the main relay buzz by moveing a fuse in the fuse box but thats all the action i can get out of it
anyone know anything that could cause symptoms like this other then a main relay?
