need some wireing help, info on page two
07-09-2006, 04:49 PM
#78
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: makein the bitch run, main relay symptoms but its not... help! info on page 2
would if i could get the bitch started 
it'll start and run for about 15 seconds with the injectors unplugged, floods with them plugged in
anyone with an EF have a Z6 swapped? if so i need to know how your injector wires are run, i think mine are wrong but the manual says there right
my injectors are wired like so
red brown #1
red red #2
red blue #3
red yellow #4
the manual says thats right but why would i be flooding if it is...?
it'll start and run for about 15 seconds with the injectors unplugged, floods with them plugged inanyone with an EF have a Z6 swapped? if so i need to know how your injector wires are run, i think mine are wrong but the manual says there right
my injectors are wired like so
red brown #1
red red #2
red blue #3
red yellow #4
the manual says thats right but why would i be flooding if it is...?
07-11-2006, 05:34 PM
#79
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: need some wireing help, info on page two
she moved 5 feet under her own power today! i have a bitch of an oil leak so i stuck some jb weld to it :1 it'll be cured tonight so hopefully shes ok to drive
if i have to force it to idle, and it runs rough under 1K rpms, but runs smoothly above, would it be ok to drive it like that? i gotta head out to a job tomorrow and need it
if i have to force it to idle, and it runs rough under 1K rpms, but runs smoothly above, would it be ok to drive it like that? i gotta head out to a job tomorrow and need it
07-11-2006, 05:38 PM
#80
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: puttin the bitch back together, need ring end gap info asap!
Originally Posted by z1guy
have fun, seriously, be prepared to hate driving.
i dunno.. we'll see once i take it for a spin tonight
