whiterice

ecu fuse in the engine bay?

Anubis_4_99

its good and in place, first thing i checked.. also checked the fuse under the dash and its good

Zeniceguycrx

sounds like 1 little ground thats no hookrd up that will take u an hour to find and have looked at 10 times already,
wire by wire check the whole harness

Anubis_4_99

i've checked all my grounds, thermo ground wasnt hooked up so i hooked it back up, still the same problem, also a plug on the harness fell out of place, guess i didnt hook it up right.. but still the same problem..

anyone know all the grounds offhand in an EF hatch with a Z6 swap? i'm going to look through the manuals i have to see if im missing anything.. thing that ****'s me off is i know it must have been working at one time.. i had 20psi of fuel pressure at the rail earlier and now cant get it back

Zeniceguycrx

got another ecu to try?

Anubis_4_99

the ecu should be good, i got it from xenocron

Zeniceguycrx

batt got 12V?
after a long install you could overlook it

Anubis_4_99

testing with it jumped from another car

im completely stumped

88crxSi

look for more grounds, is the neg cable put back on the battery? lol.

check the alt solenoid fuse in the dash fuse box too.

Anubis_4_99

i've got the problem fixed, the thermo ground wasnt good and the fuse under the dash aparently was either bad or the wrong amp size

i've got fuel, spark, etc, now my timeing is just off a bit.. i can feel it want to start but it's not quite there