d16u7nh

My head is all fucked up! So i have a z6 head that turns over great. My question is can i use my a6 dizzy and a6 intake manifold. and since the whole z6 engine is going in to a 90 crx dx i need to get a p28(chipped?) and a vtec hack. is there anything else. wahts my best cheapest way. thanks

d16u7nh

i can chipn the pm6 right

90dx

90 and up PM6's are best for chipping as older ones are complicated.Im pretty sure the A6 dizzy is a no go with OBD1.

Guy-Fast

If you convert to obd1 you need an obd1 dist

d16u7nh

so i can use my pm6 ecu and distributor and intake manifold?

Guy-Fast

yup. d16a6 dist must be modified on the mounting holes aka notched and washers used to sit flush against the head. only 2 bolts will line up even after this mod.

d16u7nh

sweet thanks. now for my next question? can i install the head today and run the engine with out the vtec hooked up. i can right?

drupie51013

sure can

90dx

You can also use a rpm switch to activate the VTEC for the mean time until you get a ecu chipped and vtec activation setup.

Guy-Fast

YUp thats fine but it will be a little weak up top without vtecahhh