honda distributors
12-19-2002, 05:40 AM
#1
0.5 BAR
Thread Starter
Join Date: Dec 2002
Posts: 76
honda distributors
i've a bunch of these lying around half taken apart....is there anyway to test the igniters on these? are they interchangeable ( dx,si,hf)? i know the control modules are the same, as are the coils....if the igniters can be tested i can prob put togther about five hf/si distributers and way more dx ones (though no one ever seems to need one of those!)
12-20-2002, 01:23 PM
#4
Guest
Posts: n/a
Re:honda distributors
Originally Posted by DJHankB
I know for SURE 110% that all of the MPFI ignitors, etc are compatible...
The DX ones may or may not work in an MPFI distributer (Si, HF, EX, 1.6wagon) That you'll have to test out yourself...
-Henry
The DX ones may or may not work in an MPFI distributer (Si, HF, EX, 1.6wagon) That you'll have to test out yourself...
-Henry
to test if the ignitor is bad, the helms tells you how to do so with the ignitor in the car.
soooooooooooooooooo
what your supposed to do is check all the wiring first. then with the key in the on position, check for current in teh white and green wire i believe. if there is current the ignitor is fine.
straight outta the book in my ghetto slang.
the control modules i believe are what vary from model to model, however the ignitor in itself remains the same.
plus the module hardly ever goes bad.!
Thread
Thread Starter
Forum
Replies
Last Post
juli0_bustamante
General Discussion
10
05-13-2004 11:10 PM
dem0nk1d
General Discussion
4
05-25-2003 02:40 AM
