traff1c

Are all D-series distributors the same?

Cause i want to install a D15Z1 on my cousins CX Hatch.

DO i have to use the one that came off the Z1 or a Z6, or will i be good with the one thats in his current engine right now? also i know i need to get a P28 to have it run good, anything else i might be missing? i know im gonna have to hook up the VTEC solenoid to the ECU,

Any link to a sight that has the pinout... or diagram would be appreciated. thanks... guys...

Semnos

The dizzy will work...I don't know how the mounting point are, maybe some cutting here or there or only tighten it on 2 bolts

brax90si

d series dizzy's are not all the same, there is the obd 0 dizzies for the 88-91 civics, and the obd 1 dizzies for the 92-95? civics, and then obd 2 for the 96 and above.....The dizzy u will need is a obd 1..

sohcvtec1995

there are obd0, obd1, obd2-a, and obd2-b. and also there is vtec ones and non vtec ones. just get the one for that car and motor.

steelcityhonda

dont forget DPFI and MPFI

juli0_bustamante

i cant beleive my eyes!!!! you need only run the OBD1 distributor.

Semnos

Both dizzy he has are OBD1...read fella's

paz

go by the OBD of the engine/ecu.

melfice_mx

i hope you use at least a DX tranny and a P28 ecu in the CX, if you want him to notice a difference..